Will Stromberg Trailer Tray fit onto an Airstream Sport 16

Updated 10/31/2016 | Published 10/30/2016

Question:

Cant tell from the measurements you provide. The height at 29inch is fine, but I cant tell how much depth I need between propane tanks and the trailer body. Has anyone installed this tray on an Airstream Sport 16? My trailer tongue is 39inch wide at the widest right against the front of the trailer and 19inch deep from back of propane tanks to front of trailer.

asked by: Richard S

Expert Reply:

The # CC-255 will most likely work well on your trailer but there are a few dimensions to consider.

The side brackets that mount to the A-frame are 4-3/4 inches wide and will fit trailer frame heights of 3-1/2 to 6-1/2 inches tall. The first bend of the upright bar happens at 9 inches, the bar then extends and raises for 11 inches from center of the post to center of the post and bends again at the height of 37 inches of height. I have attached an image for you to better see these measurements.

The adjustable brackets mounted to the top portion of the carrier allow for the center of the bars to be mounted within a 7 inches front to back.

The front mounting bracket is 13 inches long by 2 inches wide and 1/2 inch thick. This too has an adjustment of about 4 inches from front to back of the access hole. The back of the access hole almost lines up with the last hole on the side plate they are about 1.33 inches apart.

I would compare these measurements to your trailer to see if this will be compatible for your frame and spacing.

expert reply by: Jameson C