Fit and Compatibility of RV Covers for a 2016 Itasca Navion 24J with Bunk over Cab

Updated 09/19/2016 | Published 09/17/2016

Products Featured in This Question

Classic Accessories PolyPro III Deluxe RV Cover for Class C Motorhomes up to 32' Long - Gray

(555)

$425.37

Classic Accessories PolyPro III Deluxe RV Cover for Class C Motorhomes up to 26' Long - Gray

(555)

$388.32

Camco UltraGuard Class C/Travel Trailer Cover - 26' Long

(324)

$341.81

Camco UltraGuard Class C/Travel Trailer Cover - 28' Long

(324)

$367.15

Question:

Looking for a cover that will best fit our 2016 Itasca Navion 24J with cab over bunk.

asked by: Jim C

Expert Reply:

I was able to find the overall length (25 foot 5 inches), exterior height (11 foot 2 inches), and exterior width (7 foot 6 inches) of your 2016 Itasca Navion 24J Cab over bunk Class C Motorhome.

The height of each model is measured to the top of the tallest standard feature and is based on the curb weight of a typically equipped unit. The actual height of your vehicle may vary by several inches depending on chassis or equipment variations. So you will need to measure to ensure proper fitment.

Using these measurements found during my research, the model 3 # 052963793635 would be the closest Classic cover to your RV's dimensions at 23-26 foot length but will have a max height of 122 inches.

The RV cover part # CAM45742 has dimensions of 26 foot long x 110 inches wide x 98 inches tall. For a taller cover you could get part # CAM45743 that is a 28 foot long cover that has 102 inches of height and 110 inches wide.

I have linked the above mentioned products to this page for your convenience.