Dimensions Of Valterra RV Waste Valve

Question

Question:

Does this fit a 1 1/2inch o.d. drain pipe?

asked by: Michael S

0

Expert Reply:

The Valterra RV Waste Valve, part # T1001B has an inside diameter of 1.9 inches and the outside of the port measures 2.37 inches.

I went to our warehouse and measured the waste valve for you. I have attached a photo of the valve with the dimensions noted.

expert reply by: Jeffrey L

0

click to enlarge

Esther G.

6/26/2025

My handle broke off on the gray tank inside and it's not leaking. Could I replace the handle only or would I have to replace the whole valve?

Reply

Jerred H.

6/27/2025

@EstherG If you have the Valterra Waste Valve for RV Gray Water Tank item # T1001B, like the question above you can just replace the handle with the Extension Rod Kit for Valterra Waste Valve item # T1046-12VP.

Reply

Answer 1

The Valterra Waste Valve part #T1001B is the correct replacement for what you have. It is a 1-1/2 inch waste valve with 2 inch hubs that are designed to fit over 1-1/2 inch RV sewer pipe like you have.

view full answer...

Answer 2

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 3

Hey Ed, congratulations on the new motorhome! For a surge protector I would stick with the Watchdog models from Hughes Autoformers. These are nice because the surge model can be replaced if you actually experience a surge instead of replacing the…

view full answer...

Answer 4

The Valterra RV Waste Valve, part #T50A, consists of both the 3-inch valve spigot and the 3-inch bayonet outer cap. You can see this item in the linked review video.

view full answer...

Answer 5

I have a solution for you. We do not have those exact dimensions however the Better Bath RV Shower Pan - Front Drain - 32-1/8" Long x 24" Wide - White #LC210367 and the Better Bath RV Shower Pan - Front Drain - 27" Long x 27" Wide…

view full answer...

Answer 6

While we do carry great extenders for your dually 2016 Ford F-350, we do not carry any extenders with a single inflation point that inflates both tires simultaneously. However, we do have a great option that involve easily-accessible valves for…

view full answer...

Answer 7

We describe the Valterra Replacement Seals and Hardware Kit #T1003-7VP as being intended for the "old style" 3-inch waste valves. This is also how they are described on the Valterra website. The 9VP kit #T1003-9VP is for use with the Bladex…

view full answer...

Answer 8

If you're just looking to replace only the valves and nothing else then you'll just need the Valterra Bladex Waste Valve Body #T1003VP for your black tank and the Valterra Bladex Waste Valve Body #T1001VP for your gray tank. These valves just…

view full answer...

Answer 9

We do offer a 1-1/2 inch spigot that has a flange, it can be found with part #T1006-1. You will want to make sure to secure it with ABS Solvent Bond #A05-0303 which is sold separately.

view full answer...

Answer 10

To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them as we don't have a way to look up what a trailer uses based on brand. Or, you can measure the…

view full answer...

Dimensions Of Valterra RV Waste Valve

Product Page this Question was Asked From

Continue Researching