Can Universal Locking Hitch Pin Be Used on Saris Cycle-On Hitch Mounted Bike Rack

Updated 04/17/2016 | Published 04/16/2016

Products Featured in This Question

Trailer Hitch Receiver Lock - Padlock Style for 1-1/4" Trailer Hitch Receiver

(599)

$15.99

Hitch Tite Anti-Rattle Hitch Lock for Saris Bike Racks with 1-1/4" and 2" Shanks

(77)

$39.99

Question:

I recently received a Saris Cycle-On 2 Bike Rack for my 2010 Toyota Prius which has a 1.25inch Draw-Tite 24847 hitch. Can you please recommend an affordable but secure generic hitch lock in replace of the expensive Saris hitch lock?

asked by: Suzie

Expert Reply:

Saris uses a threaded hitch pin because the bolt hole going through the shank is threaded. Due to the smaller diameter caused by the threads, a universal hitch lock like the # 5200 wouldn't work. Using the correct lock, part # SA3022 would be your best (albeit expensive) way to secure your bike rack to the vehicle.

It might be possible to remove the threaded assembly from the shank of your Saris Cycle-On bike rack, but I don't recommend it for two reasons. 1) You'll lose the anti-rattle feature provided by the threaded hitch bolt that draws the bike rack's shank tightly against the side of the receiver tube, which prevents the rack from wobbling around in the hitch. 2) You'd void your warranty.

You can see a product description video of the lock by clicking the provided link.

expert reply by: Mike L