Latch Pins Needed to Hold Trunnion Bars in the Weight Distribution Head
Updated 07/13/2010 | Published 07/10/2010
Question:
I have lost the pin that holds the Trunnion bar in Place where can I order them Thanks
asked by: Hugh M
Expert Reply:
If you have an older style Trunnion weight distribution head then the Replacement Trunnion Latch Pins for Reese Standard Trunnion Style Weight Distribution, item # 58025, is the correct item.
Newer style weight distribution with trunnion bars do not use latch pins, they use a twist lock design where the trunnion bar is inserted from the side and twisted to the towing and hookup position.
If you need the pins that secure the tip up brackets on your weight distribution system you will need the Reese Replacement Clips for Weight Distribution Uplift Brackets (Qty 2), item # 58029.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Hook Up Brackets for Curt Weight Distribution Systems
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 7.5K GTW, 750 lbs TW
- Q&A: Replacement Snap-Up Brackets For a Pro Series Weight Distribution System
- Q&A: Can Curt Spring Bars Be Used With A Reese Weight Distribution Hitch Head
- Q&A: Recommendation For Snap Up Replacement Brackets For Weight Distribution System
- Q&A: Replacement Snap Up Bracket Recommendation for Reese Weight Distribution System
- Q&A: Matching Shank With 2 Inch Receiver for Reese Titan Weight Distribution System
- Q&A: Is the 58167 Reese Replacement Head The Same as the 62167 Weight Distribution Hitch Head