Fit of Cipa # CM10200 Slide On Towing Mirrors on 1989 Chevy K2500 Truck

Question

Question:

I just purchased a set of CM10200 for my 1989 chevrolet k2500 they dont seem to fit my mirrors properly any Ideas?

asked by: Dan E

1

Helpful Expert Reply:

The Cipa # CM10200 slide-on towing mirrors are designed to fit stock mirrors that are shown in the photo I provided. If your mirrors aren't like what's shown in the photo, they will not fit.

What exactly is the fit issue? Do the mirrors just not fit over the existing mirrors?

expert reply by: Mike L

1

click to enlarge

Answer 1

Hi Jeff, The K-Source Snap & Zap Custom Towing Mirrors part #KS69NQ will work with your Lariat mirrors while allowing you to retain the use of the camera and side lights! These mirrors are specifically designed to match the contours of the side…

view full answer...

Answer 2

Hey Greg. The best towing mirrors I have for a 2023 Ford F-150 are the K-Source Snap & Zap Custom Towing Mirrors item #KS69NQ. These custom fit towing mirrors snap over the backs of your factory side-view mirrors and match the contours of them.…

view full answer...

Answer 3

Hey Jerry, we had a customer who came back with a Lariat like the one you're getting and told us it fit and worked great so it would work for yours. I attached a picture of it installed on a Lariat like yours for you to check out as well. What…

view full answer...

Answer 4

It sure does Mitch! The K-Source Snap & Zap Custom Towing Mirrors #KS69NQ will attach directly to your 2025 Ford F-150 Tremor's factory mirrors. They have windows on the sides and cutouts underneath that allow you to retain the use of your…

view full answer...

Answer 5

Hello Raymond, thanks for reaching out. We do have K-Source Snap & Zap Custom Towing Mirrors for your 2025 Ford F-150, and those are part #KS69NQ. They do have cutouts on the bottom for the 360 view cameras. We have sold them to several others…

view full answer...

Answer 6

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 7

Hello Dan, Wow, that is a really nice camper, Congrats! I’m going to go ahead and say the dealer messed that up. Camper dealers are great at selling campers, but unfortunately, that’s often where their expertise ends. When choosing the right Weight…

view full answer...

Answer 8

Hey Leo! Since there are no custom towing mirrors for a 2025 Chevy Blazer the only option is universal mirrors. I recommend the K-Source Universal Dual Lens Towing Mirrors #KS3990. These mirrors use ratcheting straps making them the best option so…

view full answer...

Answer 9

Hey Mark, welcome back! This is very much a case of "you get what you pay for." The Curt TruTrack 2P #C95MJ you looked at is a good option if you tow your trailer a short distance once or twice a year. If you tow with any frequency and you…

view full answer...

Answer 10

Hello Donald, There are towing mirrors for your 2022 Chevy Blazer, but no slip-on mirrors. The slip-on mirrors are custom fit so they are really only made for trucks that do a lot of towing as opposed to SUVs. The only option for towing mirrors for…

view full answer...

Answer 11

The #10000 CIPA Custom Towing Mirrors are sold individually. For both the driver and passenger side, you will need to order two of them. The same slip-on mirror will fit either the driver or the passenger side.

view full answer...

Answer 12

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Fit of Cipa # CM10200 Slide On Towing Mirrors on 1989 Chevy K2500 Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching