Trailer Hitch with No Bumper Trimming and Wiring for a 2015 Ford Edge Sport

Updated 09/19/2015 | Published 09/18/2015

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(230)

$219.59

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(2)

$96.53

Question:

Wondering if I will have to cut any part of body or bumper on my 2015 Ford Edge Sport to install the C13234?

asked by: Bryan

Expert Reply:

When installing Curt trailer hitch # C13234 on a 2015 Ford Edge Sport there is an under body panel, not the fascia or bumper, that will need to be either trimmed or removed so the hitch can install. I have included a picture showing where the panel gets trimmed. I have also included a link to the installation instructions for you to view.

If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

And for trailer wiring, non-Titanium models take harness # 118559, and for a Titanium model use # 118677.

expert reply by: Michael H