Should Rivet Nuts Or Thread Forming Screws Be Used When Installing Dual-Cam Sway Control
Updated 06/23/2015 | Published 06/20/2015
Question:
Hi, Do I need to use these rivnuts to install the dual cam arms with the thread forming screws or can I just tap threads directly into the frame? Thanks..
asked by: Travis
0
Expert Reply:
The Rivet Nuts for Reese Dual Cam High Performance Weight Distribution, part # RP58507, are included with a dual-cam system like part # RP26002. You can check out the installation instructions that are attached for the # RP26002 and see how these are installed.
The thread forming screws are used on a tubular style frame attachment, and are not used on a standard trailer frame.
expert reply by:
Jeffrey L
0
Continue Researching
- Search Results: reese straight line hitch
- Video: Rivet Nuts for Reese Dual Cam High Performance Weight Distribution Feature Review
- Q&A: Reese Weight Distribution Dual Cam Brackets Dislodged from Trailer Frame
- Q&A: Reese Dual Cam High-Performance Sway Control Bracket Installation Instructions
- Q&A: Difference Between TST-507-RV-6-C and TST-507-FT-6-C Tire Pressure Monitoring Systems
- Q&A: Recommended SnapPads For A Lippert PSX1 Electric Stabilizing Jack
- Q&A: Difference Between Weight Distribution Chain Lift Brackets # 586392 and # RP21501
- Q&A: Are Thread Forming Screws 58437 For Reese Dual Cam Sway Control RP26002 Reuseable?
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Q&A: Installation Instructions for Reese Dual Cam Weight Distribution System
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: How to Keep Your RV Cool This Summer
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: Ram Trailer Tow Prep Package