Troubleshooting Green Wire on Trailer Pulled by 2003 Ford Expedition
Updated 06/22/2015 | Published 06/20/2015
Question:
As Im checking the trailer connection the turn/stop lights dont work .. Ive already found that the green wire dont work .. Ive checked the fuses as well and all is good .. where could I find the wire diagram or where does the wire lead to I lose it under the frame
asked by: Daniel
Expert Reply:
On a 4-Way flat trailer wiring harness, the green wire will go to the right turn signal. The white is the ground, brown is running lights, and the yellow is left turn signal. Take a look at the trailer wiring diagram that I included. This very well could be a ground problem. If so, correcting the bad ground or broken wire could solve the problem.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2014-2015 GMC Terrain
- Q&A: How To Wire LED Trailer License Plate Light For Cargo Carrier To A 4 Way Flat
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Screws Needed To Attach 5/8" Treated Plywood To Aluminum Snowmobile Trailer Frame
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Recommended Parts for Flat Towing a 2010 - 2015 GMC Terrain
- Article: Trailer Lighting Requirements
- Article: 4 Times You'll Regret Buying the Wrong Bike Rack
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub