Will Curt Hitch Trailer Hitch, # C11290 Fit On 2002 Honda Accord V6

Updated 05/07/2010 | Published 05/06/2010

Question:

Does this hitch work work with the 2002 Accord V-6?

asked by: Rob

Expert Reply:

Yes, the Curt Trailer Hitch, # C11290, will work on your 2002 Honda Accord V6. It requires drilling two 1/2" holes in the trunk pan, but no welding.

This hitch recommends the Draw-Tite Drawbar # 3594 which includes a pin and clip. You would also need a hitch ball, either a Tow Ready Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, # 19256, or a Tow Ready Hitch Ball with 2 inch Diameter and Short Shank, 3,500 lbs GTW - Chrome, # 19258, depending on what size coupler is on your trailer.

The wiring harness you would need is Tow Ready Custom Fit Vehicle Wiring for the 2002 Accord by Honda, # 118336, it plugs into the connector on your vehicles wiring harness that is located in the trunk on the driver's side behind a trim access panel.

I will send a link with instructions on the hitch and the wiring harness.

expert reply by: Jeff D