Brake Controller Wiring Harness for 2013 Nissan Armada Platinum and P3 Brake Controller

Question

Question:

Will this harness fit a 2013 Nissan Armada with tow package? I have the P3 unit in my truck but want to be able to switch between that and the Armada.

asked by: John R

0

Expert Reply:

If your 2013 Nissan Armada came with a factory installed 7-Way trailer connector as part of its tow package then yes, use can use harness # 3050-P for your P3 brake controller # 90195.

If your Armada did not come with a 7-Way then you would need to add # N40975.

For a second mounting bracket for the P3 you can use # TK5906 or # TK5904.

expert reply by: Michael H

0

Answer 1

The etrailer Tongue Weight Scale for Campers and Utility Trailers #e99044 does not have the ability to be calibrated but would not need it.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 9

Hey Martin, it's great to hear from you again! If I were in your shoes I'd go with the Eaz-Lift ReCurve R3 rated for 1,000 lbs of tongue weight so you're able to still load a few things up in your truck bed (behind your rear axle) and not…

view full answer...

Answer 10

It looks like you ordered both from us today to use with your Carrier lower vent assembly. The heat strip will work with the Advent but if I am being perfectly honest a lot of times these mixed brand AC Unit solutions don't work as consistently…

view full answer...

Brake Controller Wiring Harness for 2013 Nissan Armada Platinum and P3 Brake Controller

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching