Base Plate Kit Recommendation for a 2015 Jeep Cherokee  

Question:

Expert Reply:

The Roadmaster Base Plate Kit part # RM-521447-4 that you referenced could easily be installed by any qualified mechanic in your area. It's not a specialized install so any mechanic in your area with a good reputation would have no problem at all. I attached an install video for you or the mechanic to check out as well.

You will need a few other items to complete your flat towing setup. For a compatible tow bar, you can use the Falcon 2, # RM-520. I have included a link to a video showing an installation for you. You will also need safety cables if you do not already have some, # RM-643.

And finally, most states now require supplemental braking on the vehicle being flat towed. One of the easiest systems to set up and use is the Even Brake proportional system # RM-9400. It will apply the Jeep brakes in proportion to how much the tow vehicle is braking. This is the easiest way to stop and it reduces wear and tear on both vehicles.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

Be sure to consult your Jeep owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by: Jameson C

0