Does WeatherTech Truck Bed Mat # WT39601 Have Cut-Outs for Ford Factory Tow Prep Package

Question

Question:

Are there cutouts for the under bed factory installed fifth wheel prep package? Thanks.

asked by: Alan

0

Expert Reply:

WeatherTech doesn't pre-cut the mat for the bed mounted pucks of the Ford OEM tow prep package, you'll need to cut the holes yourself. As you can see in the photo I've provided, WeatherTech clearly marks where you'd need to trim the mat.

expert reply by: Mike L

0

click to enlarge

Answer 1

You can install a truck bed mat in your 2017 Ford F-250 with the factory 5th wheel/gooseneck prep so long as you trim the mat to allow full metal-on-metal contact of the hitch to the installation rails. There cannot be any part of the mat trapped…

view full answer...

Answer 2

We do have a compatible fitting mat for your 2022 Ford F-250 Super 8' bed but none with the pucks already marked. The Westin Custom Fit Truck Bed Mat - Rubber - Black #50-6415 will protect your truck bed and your cargo from damage. The ribbed…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 7

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 8

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 9

Hi Kipp; the Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch #BLU54TR will work well with this setup. The tongue weight range for this system is 1,000-1,500 lbs. With batteries and propane added to the trailer tongue you…

view full answer...

Answer 10

Hey Bob, I can assure you that the Thule WingBar Evo Roof Rack for Naked Roofs #TH48KG will also work with your F-250. For a black version, you can use the Thule WingBar Evo Roof Rack for Naked Roofs #TH32KG with the Evo Clamp Feet for Thule…

view full answer...

Answer 11

I am sorry Ira but it will not. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR is currently the only replacement available for the Turning Point pin box. Unfortunately, there is not a normal king pin pin box that will…

view full answer...

Answer 12

Hey Mike, thanks for reaching out! The 16K Pullrite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…

view full answer...

Does WeatherTech Truck Bed Mat # WT39601 Have Cut-Outs for Ford Factory Tow Prep Package

Product Page this Question was Asked From

Continue Researching