Rustproof stainless steel faucet modernizes your RV bathroom and is tall enough for your vessel sink. Maintenance-free, watertight diamond ceramic disc cartridge prevents the faucet from dripping and wasting your water.
Features:
Specs:
To install, use the inlet shank to drop the new faucet and deck plate in place through the mounting hole of your existing bathroom faucet. Then tighten the included hardware against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Empire Faucets chrome, single lever handle RV bathroom vessel sink faucet. Now, this stainless steel faucet has a spout that is tall enough to let you upgrade the bathroom vessel sink faucet in your RV or camper. This features a single handle design with a lever style handle. And the diamond ceramic disc cartridge is maintenance free.
And the durable, long-lasting discs create a watertight seal when the faucet is turned off. The high-rise spout is tall enough to clear your vessel sink edge. The height from the countertop to your aerator is gonna be sitting right at 2 3/4 inches. And the spout length is right at five inches. And the flow rate is 2.2 gallons per minute.
This is WaterSense certified. This has a rustproof stainless steel construction with this chrome finish. And this is a one-hole installation. And it is going to install with the included, let me go to this view here, with the included 19 inch long stainless steel water lines and mounting hardware. So, using the inlet shank, you would just drop your new faucet in place through the mounting hole of your existing faucet and then just tighten the included mounting hardware.
Finally, you would connect the hot and cold water lines using tub and tile caulk, which is not included with this. That is required. And the water supply line size is a half male pipe thread. The overall dimensions, we are sitting at 5 3/4 inches wide. And including the end of the spout, we're sitting right at about 6 1/2 inches deep.
With the handle all the way open, this is gonna be sitting a total height of 7 3/4 inches tall. And then with the handle closed, we're gonna be sitting right at seven inches tall. The deck plate dimensions, again, are gonna be 5 3/4 inches wide and 2 1/4 inches deep, and the thickness is about 3/8 of an inch thick. The inlet shanks are an inch and a quarter in diameter. And in length, they're about an inch and 3/4. This does have a limited lifetime warranty. And that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.