New Arrivals

Refresh your RV's city water inlet with this secure hatch. The brass check valve is lead-free and has a 1/2" MPT water connection. Easily accepts city water pressure to fill your water system. Removable screen filter.

• RV Water Inlets
• City Fill Inlet
• Flush Mount
• 3 Inch Deep
• Plastic
• Brass
• White
• B and B Molders

Change out a failed RV brass check valve with this surface mounted city water inlet. The integrated inlet and valve are lead-free and have a 1/2" MPT water connection. Removable screen filter keeps debris out of your water system.

• RV Water Inlets
• City Fill Inlet
• Surface Mount
• 1-1/2 Inch Diameter Cutout
• 1-11/16 Inch Deep
• Plastic
• Brass
• Black
• B and B Molders

You're setting up at the campsite and go to run power, but the old hatch is cracked and loose. You swap in this locking cover, route the cord through the notch, and snap it closed. Your cord is secure and now you just have to plug in.

• RV Access Doors
• Electrical Cable Hatch
• Rectangle
• Locking
• 7-5/8W x 6-1/2T Inch
• 5-3/4W x 4-1/2T Inch Cutout
• Black
• B and B Molders

You're checking the corner of your slide-out and notice the drip pan's missing. Now water's got a direct path to run down the trim and straight into trouble. This left-hand replacement catches the runoff and fits tight to steer it clear.

• RV Slide Out Parts
• Caps and Covers
• Drip Pan
• Bolt-On
• Black
• B and B Molders

Improve the look of your RV's slide-out with this molded plastic cover. The arrow shape adds protection to the corner edge of your slide-out cap. The hooked lip edges of the arrow tip and single screw hole make installing easy.

• RV Slide Out Parts
• Caps and Covers
• Straight Arrow Corner
• Bolt-On
• Black
• B and B Molders

If you back into a parking spot or try to merge in city traffic, you might hold your breath and hope nothing was hiding out of sight. This system gives you a 360º view and sensors, so you can see every angle, get alerts, and park your rig safely.

• Blind Spot Detection
• Trucks
• Blind Spot Detection
• HD Video
• Audio Alert
• Brandmotion

It's stressful when your vehicle is packed to the roof and you can't see what's going on behind you. This digital rear view mirror restores that view and records video, so if anything happens, you've got proof to protect yourself.

• Backup Camera
• Backup Camera Systems
• Standard Camera System
• Hardwired
• 170 Degrees
• Rearview Mirror Monitor
• Replaces Existing Mirror
• Brandmotion

You're up on the ladder checking your slide-out and notice the corner is exposed. The square cover is gone, and now water's got a direct shot into the seam. This replacement squares it off, seals the joint, and blends right in with the trim.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Beige
• B and B Molders

You can't stop the rain, but you can control where it goes. These gutter spouts guide water away from your rig so it doesn't leave streaks down the side or puddles by the door. A small fix that makes a clear difference when the weather turns.

• RV Trim
• Gutter Parts
• Beige
• B and B Molders

Tucked into the wall and sealed up tight, this docking station keeps your hookups organized and out of sight. Flip the door, hook up, and you'refree to kick back - your campsite setup just got way easier.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-3/4 Inch Deep
• Plastic
• Black
• B and B Molders

Install this multi-purpose hatch on your RV's exterior to create an access point. The open back hatch consists of a mounting flange (no collar), and door. Plastic thumb turn lock can be replaced with a keyed-alike lock cylinder.

• RV Access Doors
• Multi-Purpose Hatch
• Rectangle
• 12-5/8W x 7-3/4T Inch
• 11-1/16W x 6T Inch Cutout
• Black
• B and B Molders

Want to clean up after a morning hike in the woods without mucking up the inside of your RV? We'd recommend rinsing your shoes off with this lockable outdoor shower box so you don't track mud in on the way to take a full shower.

• RV Showers and Tubs
• Outdoor Shower
• Shower Boxes
• White
• B and B Molders

You're walking up to the front of your 5th wheel and spot the trim corner exposed. The cover is gone, and now the seam is open to moisture and road spray. This replacement screws into place to finish off the edge and match your front-end trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

Install this effective rear trim piece to cover and protect the top right corner seam of your RV. Designed to cover this 90-degree corner with about 5" on each side, this part is easy to install and won't fade from UV exposure.

• RV Trim
• Plastic Molding
• Black
• B and B Molders

Electric cable RV hatch with 2-3/8" depth collar for electrical cords up to 50 amp size. Supportive, slotted back area stabilizes heaver cords and plugs. Sliding access door creates a pass-through, and pushes firmly back into place.

• RV Access Doors
• Electrical Cable Hatch
• Round
• 5-1/8 Inch Diameter
• 3-1/2 Inch Diameter Cutout
• Black
• B and B Molders

Replace a failed RV brass check valve with this recessed dish mount city water inlet. The integrated inlet and valve are lead-free and have a 1/2" MPT water connection. Removable screen filter keeps debris out of your water system.

• RV Water Inlets
• City Fill Inlet
• Recessed Mount
• 3-1/2 Inch Diameter Cutout
• 3 Inch Deep
• Plastic
• Brass
• Black
• B and B Molders

You're replacing a sun-faded, road-battered, barely sealed access hatch that's been holding on by a thread since your last trip. You pull it off, line up the new one, and it fits. Like it was made for your rig from the start. Because it was.

• RV Access Doors
• Multi-Purpose Hatch
• Square
• Locking
• 8W x 8-1/2T Inch
• 6-3/4W x 6-15/16T Inch Cutout
• White
• B and B Molders

Standard key lock replaces 1 worn or damaged lock on your RV hatch door. Direct replacement for 5/8" cylinder length lock with generic key code 751. Chrome-plated zinc lock with offset blade.

• RV Door Locks
• Compartment Door
• Cam Locks
• Keyed Alike
• Offset Cam
• 5/8 Inch Long
• Silver
• B and B Molders

You're checking the base of the slide-out after a long weekend and notice the right-hand trim cap is gone. The open end is collecting dirt and giving water a way in. This replacement screws into place to cover the opening and matches your trim.

• RV Trim
• Plastic Molding
• White
• B and B Molders

Keep your RV protected and looking new with this direct replacement square cap for your slide-out room. Simple to identify by the square shape with a 3-corner hole pattern, this cap also resists impact and won't fade from the sun.

• RV Slide Out Parts
• Caps and Covers
• Square Corner
• Bolt-On
• Gray
• B and B Molders

Easily manage RV or camper docking needs for your water and AV setup when you arrive on site. Control your water system for filling, sanitizing, and winterizing with simple diverter valves. Match up your current Nautilus with this direct replacement.

• Smart RV
• Management System
• Monitoring System
• Water Tanks
• Water Pumps
• Light indicator
• B and B Molders

Heat vent with a rotating grille and damper to keep your RV comfortable. Easily adjust warm or cool airflow in any location with minimal effort. Simple to install with 4" duct and 4-1/8" cutout. Installed grille covers mounting screws.

• RV Vents and Fans
• Vent
• Floor Vent
• Ceiling Vent
• Wall Vent
• No Fan
• Plastic
• White
• B and B Molders

Direct water away from your RV with this extended length gutter spout that drains water away from your RV roof, avoiding those unsightly black streaks. Fits all rain gutter rails up to 1-3/8" wide, including awning profile rails.

• RV Trim
• Gutter Parts
• White
• B and B Molders

You're walking around your rig and notice the trim ends suddenly on the left side. No cap, just an exposed edge catching dirt and water. This replacement seals it up and finishes the run so it actually looks like it came that way.

• RV Slide Out Parts
• Caps and Covers
• End Cap
• Bolt-On
• Black
• B and B Molders