New Arrivals

Mount a 3/4" round trailer light with this flush bracket. Compatible with dozens of Optronics LED models. Black plastic housing resists corrosion. Surface mount design installs easily. Light and mounting hardware sold separately.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Grommet
• Diamond
• Optronics

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert

All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Lippert

Need an air distribution box for your ductless Furrion Chill Cube RV AC setup? This low-profile unit includes a remote control that can sense and adjust the temperature of the area in your RV that the remote is in.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Furrion

Replaces the mount for your Solera 3000 Series RV awning.

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

Replace a cracked or missing roller end cap on your powered Lippert Edge Slim awning. This black cap fits the end of the roller tube, protecting internal components and maintaining the awning's sleek, low-profile look.

• Accessories and Parts
• RV Awnings
• Rollbars
• End Caps
• Black
• Lippert

Replaces 1 hydraulic jack assembly and hydraulic face seal fittings for your Lippert Level Up RV leveling system. Constructed of black aluminum. Retracted height is 21-1/16" with a 9" diameter footpad.

• Accessories and Parts
• Camper Jacks
• Jack Assembly
• Lippert

Replace a missing side plug on your Lippert Power Tongue Jack V2. Push-in rubber cover (1-3/8" OD) seals the jack-head opening to keep out water, dirt, and road grimerestoring full protection in seconds, no tools required.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Caps
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 4-pin interface harness restores electrical connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's a easy fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Lost or bent your extension rods? This replacement set gets your white Solera slide-out awning working like new again so you can get back to smooth RV living.

• Accessories and Parts
• RV Awnings
• Extension Rod
• White
• Lippert

Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136).

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Panel
• Lippert

This is the most convenient way to add LEDs to your RV awning: the light is pre-installed in a plastic strip and mounts to the wall. It's designed to get max brightness with minimal power, reflecting off the RV wall to fill the patio with light.

• Accessories and Parts
• RV Awnings
• Lights
• 16 Feet Long
• Strip Light
• Black
• Lippert

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-3/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-5/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This fits Lippert Rhino Box pin boxes with skid plates that are 7-3/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Rhino Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

This adapter attaches to the factory, underbed 5th-wheel prep package receivers in your vehicle so that you can use your PullRite SuperGlide hitch that normally attaches to industry-standard rails (2700 or 2900).

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Reese 5th Airborne pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• 5th Airborne Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Fabex Pin Box
• Pullrite

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits cushioned MORryde pin boxes with skid plates that are 13-1/2" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite