New Arrivals

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

Driver's-side 10" x 2-1/4" hydraulic drum brake assembly features a free-backing design for smooth reversing. Fits 3,500-lb axles with 13" to 15" wheels and mounts with a 4-bolt flange.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 3500 lbs
• Brake Assembly
• 10 x 2-1/4 Inch Drum
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.

• Accessories and Parts
• Trailer Jack
• Electric Winch
• Caps
• Dexter

Even one worn brake can make towing feel sketchy. Replacing a single ABS brake assembly brings back balanced braking and steadier control, so your trailer handles the way it should when traffic gets tight or the road gets steep.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• LH
• 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Keep your Dexter axle properly lubed with these press-in grease zerks. Designed for E-Z Lube and Nev-R-Lube axles, they let you easily attach a grease gun for routine maintenance. Measures 1/4" outer diameter x 5/16" length.

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter

Stay connected and in control. This direct replacement kit for Dexter Tow Assist includes the indicator light and Bluetooth adapter, restoring mirror visibility and live app updates so you always know how your trailer is responding.

• Accessories and Parts
• Trailer Brakes
• ABS System Wheel Sensor Parts
• Electric Drum Brakes
• Indicator Light
• Bluetooth Adapter
• Dexter

Stay in tune with your trailer. This direct replacement indicator light for Dexter Tow Assist mounts outside for quick mirror checks, showing the system is on, running diagnostics at startup, and keeping you connected through the app.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• ABS System Wheel Sensor Parts
• Indicator Light
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Even one worn brake can make towing feel sketchy. Replacing a single ABS brake assembly brings back balanced braking and steadier control, so your trailer handles the way it should when traffic gets tight or the road gets steep.

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• RH
• 7000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 23-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.

• Accessories and Parts
• Watersport Carriers
• Roof Box
• Roof Bike Racks
• Ski and Snowboard Racks
• Roof Rack
• Load Assists
• MOS Racks

Transform your Mad-Ramps setup into a loading system for your snowmobile. As long as your skis are 34" - 42" apart, you can use this kit - along with your Mad-Ramps - to easily and safely get your snowmobile in and out of your truck bed.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Snowmobile Kit
• Mad-Ramps

Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• MORryde

Replaces a MORryde rubber shear spring embossed with "63". Works with MORryde rubber leaf spring suspension systems.

• Accessories and Parts
• Trailer Suspension Parts
• Springs
• MORryde

Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 19-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Keep your extension cords stored neatly on the wall of your RV basement or garage. Bracket mounts to wall, giving you a dedicated place to store the cord keeper. Compact design fits standard 125V extension cords up to 50' long.

• Accessories and Parts
• Extension Cords
• Cord Keeper
• MORryde

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 4-step with 23-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Attach these risers to the ramps on your Mad-Ramps setup to get the lift needed for loading low-riding gear like golf carts. Recommended for golf carts with 10" or 11" wheels.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Golf Cart Risers
• Mad-Ramps

Stop tracking dirt into your RV. The MORryde StepBrush mounts under your StepAbove steps, giving you a convenient spot to clean your shoes before stepping inside. The detachable brush doubles as a step sweeper and stows away neatly when not in use.

• Accessories and Parts
• RV Steps
• Boot Brush
• MORryde

Use your Mad-Ramps pivoting ramp setup with a flatbed truck. This US-made kit lets you install the Mad-Ramps system for 2-1/2" hitches on most flatbed and utility-box trucks.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Flatbed Kit
• Mad-Ramps

If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• MORryde