New Arrivals
Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2
Replace the grease seal on your Dexter 12" x 2" hub manufactured after 1998. Inner diameter measures 2.25". Outer diameter measures 3.376". Includes 2 seals.
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- Dexter
Dexter Vault Hybrid Lubrication Kit for 7,000-lb Trailer Buddy Axles
If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 7000 lbs Axle
- Dexter
Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 10" - Left/Right Hand - 3.5K
The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- ABS
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14-1/2 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- Dexter
Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- 1.72 Inch I.D.
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- Dexter
Dexter Boat Trailer Axle - 92" Long - Galvanized
Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 4200 lbs
- Spindles Only
- 92 Inch Hub Face
- Drop - 4 Inch
- Dexter
Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
In Stock
Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.
- Trailer Hubs and Drums
- Idler Hub
- Standard
- Pre-Greased
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 8 Inch Wheel
- 12 Inch Wheel
- Dexter
Dexter 516 Dump Trailer Power Hoist Kit
Dump trailer power hoist lifts the trailer bed for easy unloading. Kit includes hydraulic power unit, hoist assembly, hoses, fittings, safety arm, battery cables, and hardware.
- Dump Trailer Parts
- Lifting System
- Power Hoist Kits
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K Axles - 8 on 6-1/2 - Oil Bath - Qty 1
In Stock
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- ABS
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 8 on 6-1/2 Inch
- 17 Inch Wheel
- 16-1/2 Inch Wheel
- 16 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Dexter DX6.6 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 6,600 lbs
In Stock
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls. Designed for hydraulic drum brake applications.
- Brake Actuator
- Straight Tongue Trailer Coupler
- Surge Brake Actuator
- Farm Trailer
- Construction Trailer
- Boat Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 6600 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs
In Stock
Hub-and-rotor assembly works with 4,200-lb Dexter disc brakes. Zinc finish protects against corrosion. Vented design prevents heat-related damage.
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L68149
- Marine Grade
- For 4200 lbs Axles
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 15 Inch Wheel
- 14-1/2 Inch Wheel
- Dexter
Dexter Vault Hybrid Lubrication Kit for 6,000-lb Trailer Buddy Axles
If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 6000 lbs Axle
- Dexter
Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 10" - Left/Right Hand - 4.4K
The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- ABS
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 13 Inch Wheel
- Dexter
Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.72 Inch I.D.
- Bearing LM67048 and L68149
- Race L68149 and L68111
- 4400 lbs Axle
- Dexter
Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
In Stock
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, and a cotter pin.
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- Dexter
Dexter 520 Dump Trailer Power Hoist Kit
Dump trailer power hoist lifts the trailer bed for easy unloading. Kit includes hydraulic power unit, hoist assembly, hoses, fittings, safety arm, battery cables, and hardware.
- Dump Trailer Parts
- Lifting System
- Power Hoist Kits
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - E-Z Lube - Qty 1
In Stock
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Dexter Trailer Power Tilt Deck Kit - Welded - 3x10 Cylinder Assembly
Welded, power tilt deck kit makes loading and unloading vehicles easier without ramps. Includes hydraulic power unit, battery strap, cylinder assembly, hydraulic hoses, battery cables, supports, and safety signs.
- Dump Trailer Parts
- Lifting System
- Tilt Deck Kits
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K E-Z Lube - 8 on 6-1/2 - Qty 1
In Stock
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Horse Trailer Butt Bar Pad - 29" Long
Keep your horse safe and comfortable with this cushioned butt bar pad. The 2" thick foam absorbs impact, while the durable vinyl cover easily wipes clean.
- Horse Trailer Accessories
- Protectant Pads
- Butt Bar Pad
- 29 Inch Long
- Vinyl and Foam
- Redline
Dexter Fortress Bolt-On Aluminum Oil Cap Kit - Fits 9K12K Axles - Black Coated - 6-Bolt Install
Upgrade to the Dexter Fortress oil cap kit for secure hub sealing and easy maintenance. Designed for 9K12K axles, this bolt-on cap includes gasket, plugs, and hardware, and works with both oil and grease lubrication systems.
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 10000 lbs Axle
- 12000 lbs Axle
- 9000 lbs Axle
- Dexter
Dexter Bearing Kit for 9K - 10K Axles - Inner and Outer Bearings 387A/25580
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 2.88 Inch I.D.
- Bearing 387A and 25580
- Race 382A and 25220
- 7200 lbs Axle
- 8000 lbs Axle
- Dexter
Dexter Hydraulic Trailer Brakes - Free-Backing - 10" - Left/Right - 3.5K
Swap both trailer brakes with one kit. Includes left- and right-hand 10" free-backing hydraulic drum assemblies for 3,500-lb axles. Reverse without drag, mount to a 4-bolt flange, and count on galvanized plates with stainless hardware.
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- Dexter
Dexter Grease Caps with 2.446" OD - Fits 12" x 2" Hubs - Zinc-Plated Steel - Qty 2
In Stock
Protect your trailer's bearings with these 2.446" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in fit installs easily. Designed for 12" x 2" Dexter hubs with 4-, 5-, or 6-bolt patterns. Includes 2 caps.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.44 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- Dexter
DeeMaxx 8K Disc Brake Kit 13" Hub-Rotors Maxx Coating Oil Bath Threaded Caps Qty 2
Haul with confidence using DeeMaxx 13" hub-rotor assemblies with MAXX coating and threaded oil caps. Designed for 8K oil bath axles with 5/8" studs. Includes races. Works with most disc brake calipers and mounting brackets.
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 8000 lbs Axle
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- DeeMaxx