New Arrivals

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/8" chains. 18,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• Weld-On
• 5 Mounting Positions
• Brophy

Replaces the 3/16" x 113" long steel aircraft cable for your Brophy cable camper jack with 57" max lift height (CJ41, CJ31, CXHD, or CJ31H).

• Accessories and Parts
• Camper Jacks
• Cables and Cords
• Brophy

Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.

• Accessories and Parts
• Pintle Hitch
• Mounting Hardware
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Weight Distribution Hitch
• Locks
• Locking Pin
• B and W

This sturdy carbon-steel hitch ball is designed for use with B&W Continuum weight-distribution systems. Features 2-1/2" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Ball
• B and W

Your hitch is the muscle behind every haul. But even the toughest gear has a weak spot. One pulled pin and your Tow & Stow could disappear. This tough little lock secures the adjustment pins and keeps your setup looking sleek and secure.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• B and W

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

This electric heat strip works with your R32 compatible AC unit (sold separately) to remove the chill from your RV or camper on cold or frosty mornings. Power cord and mounting hardware are included for easy, plug-and-play installation.

• Accessories and Parts
• RV Air Conditioners
• Heat Strip
• Advent Air

Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

This 7-way to SAE cable connects your vehicle with a 7-way RV style connector to a SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Air Lift

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton