Trailer axle measures 49-1/2" from hub face to hub face and 38-7/16" from Spring center to spring center. Includes fully pre-assembled studded hubs. Made for a 40" frame.
7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!
9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
Required in most states, a safety cable acts as a backup if your trailer becomes disconnected from your tow vehicle. cables to your trailer's coupler, and then hook the S-hooks to your hitch.
6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal (171225 DL/TB), and a cotter pin.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.
This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.
These brackets let you mount your single-axle fenders with side steps to your trailer. Includes 2 bolt-on, galvanized brackets to mount one fender. Works with CE19502, CE19503, CE19504 fenders (sold separately).
Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.
This 3" diameter x 1-1/4" wide rubber endcap mounts to the keel roller on your boat trailer to protect your boat from damage during loading and unloading. Also helps guide your boat onto the trailer.
This 2-1/2" diameter x 1-1/4" wide rubber endcap mounts to the keel roller on your boat trailer to protect your boat from damage during loading and unloading. Also helps guide your boat onto the trailer.
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.
Filter Results
