Radial tire with automotive-grade tread has a 10-ply rating and a 2,830-lb max load at 80 psi. Acrylic enamel finish resists damage. Complimentary roadside assistance included. Assembly is match mounted and balanced.
15" x 5" Trailer wheel has 5 on 4-1/2 bolt pattern and 3.19" pilot diameter. Rustproof aluminum wheel has a 5-spoke design in matte black. Steel inserts in lug nut wells secure wheel.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Radial tire has a ply rating of 6 and a 2,200-lb maximum load at 75 psi. The 14" diameter x 5-1/2" wide aluminum trailer wheel has a 5 on 4-1/2 bolt pattern and a 5-spoke design in black with a machined silver face.
2,100-lb Capacity. Upgrade your vehicle's rear coil spring suspension. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Includes a standard duty air compressor with analog control.
Borrowing a trailer with a 7-way plug but only have a 4-way on your vehicle? Get the light functions you need to be legal with this plug-in 4-way to 7-way adapter. Does not give you the electric brake or auxiliary power functions of a 7-way.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Replace that dirty, cracked, or leaking skylight and let the sunshine in. This inner garnish fits a 18" x 30" cutout and installs easily. Made from UV-resistant polycarbonate, it holds up against the sun without turning brittle or yellow.
This innovative, detachable hitch keeps your vehicle looking like it just came off the lot. Receiver adapter can easily be removed for a fully concealed look when you're not towing.
Whether we're camping or boating, we get tired of paper towels cluttering up the place. Now we can mount a roll on any solid surface with this handy vacuum-cup mounted holder. It even holds the roll snug to prevent it from unravelling.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.
Securing your ATV or UTV is easy with these 4 ratcheting tie-down straps. Installs around and over each tire with 2 areas of adjustment to hold your ATV down, while still allowing its suspension system to operate during transport.
These custom fit tie-downs give you the safest and most comfortable ride when hauling a camper. They mount to the frame of your pickup - no drilling required! With the arms removed, the brackets can barely be seen. Made of rustproof aluminum.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.
Insert this heavy-duty mount into your 2-1/2" hitch to get 6 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.
Level your trailer in minutes with no stacking or guesswork - just drive on. Adjusts from 1/2" to 4" and supports up to 30,000 lbs. Includes 2 levelers, 2 chocks, and a carry bag.
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Stainless steel receiver resists corrosion.
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Stainless steel receiver resists corrosion.
No more getting in and out of your truck to mess around with a manual slider. This hitch slides automatically to give you 14" of additional clearance for tight turns whenever you need it. Custom underbed installation kit included.
This completely hidden hitch keeps your vehicle looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Filter Results
