Hitch-mounted LED has reverse, brake, and running light functions to illuminate your surroundings and increase visibility for you and other drivers. Optional strobing effect available on brake light. Easy, plug and play installation and removal.
Your brake actuator sits close to the trailer frame, and a straight hose just won't cut it. This 18" hose uses a 90-degree fitting to make that first tight turn without bending or twisting.
This XL acorn lug nut offers the same secure, rust-resistant fit as the standard version, but with extended height for deeper thread engagement. The closed-end bulge fits tight, while the chrome finish fights off rust and grime for the long haul.
Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.
Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.
A standard hose isn't long enough to run a brake line from your actuator to your trailer axle. This 20' hose gives you the reach to make that connection without adding couplers or extensions.
This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.
Your trailer's wired right, but the brakes still won't fire. If your factory controller doesn't recognize your electric-over-hydraulic actuator, this adapter sends the signal it needs so the brakes activate, no rewiring required.
Need a tough, reliable connection from your actuator to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.
This 23' hose gives you the length to run a brake line from your actuator to the axle on longer trailers. The extra reach lets you make a full connection without adding couplers or mid-line fittings.
This stainless steel acorn lug nut laughs in the face of rust. Perfect for saltwater use, it stays strong and rust-free. No chipping, no peeling, just a tough, reliable fit that shrugs off moisture, salt, and road grime for the long haul.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Restore your Curt TruTrack 2P hitch with this direct replacement head. Built to fit 5,000-lb to 8,000-lb systems only (17599), it keeps your setup towing straight with integrated sway control right where you need it.
Replace the ball on your Curt TruTrack 2P hitch with this 2-5/16" steel ball. Made for 5,000-lb to 8,000-lb systems only (17599), it bolts to the head and matches your system's capacity for safe, stable towing.
Replaces the short bed bracket for your Curt OEM puck system gooseneck ball kit (C60668 or C60663). Compatible with 2023-2025 GMC Sierra and Chevrolet Silverado trucks with 6.5' short beds.
Keep your Empire Faucets hybrid RV kitchen faucet (SL1000-A) working like new with this replacement cartridge. Designed for a precise fit, it restores smooth water flow and reliable performance, so you can enjoy hassle-free use on the road.
Confidently install your Old Man Emu leaf springs with the OMESB118 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OMEGS20 greaseable shackles. Works with EL120R and EL121R leaf springs. Each spring pack requires one bushing kit.
This breakaway switch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.
Keep your trailer plug off the ground and out of the dirt with this holder. Secures to your trailer and gives you a spot to clip your breakaway cable when it's not in use. Fits 7-way plug.
Drop in with Gen-Y's combo hitch for Dodge Ram OEM pucks. Run your Curt Q24/A25 head for 5th-wheel days, or switch to the 2-5/16" ball for gooseneck jobs. Rated 25K, it cuts heavy lifts and keeps your truck ready for anything.
Drop in with Gen-Y's combo hitch for Ford OEM pucks. Run your Curt Q24/A25 head for 5th-wheel days, or switch to the 2-5/16" ball for gooseneck jobs. Rated 25K, it cuts heavy lifts and keeps your truck ready for anything.