New Arrivals

Mount your trailer's 1-3/4" slipper springs with this bolt-on spring hanger kit.

• Trailer Suspension Parts
• Hangers
• Boat Trailer
• Car Hauler
• Snowmobile Trailer
• Utility Trailer
• Camper
• Single Axle
• CE Smith

CE Smith 18" long keel roller for boat trailers.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 18 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.

• Trailer Suspension Parts
• Shackle Bolts
• Snowmobile Trailer
• Boat Trailer
• Camper
• Utility Trailer
• Car Hauler
• 3-1/2 Inch Long
• CE Smith

9" Wide x 65" long x 15" tall. This trailer fender features classic Jeep styling and rugged, rustproof diamond plate aluminum construction. Bolt onto your trailer to help block damaging road debris.

• Trailer Fenders
• No Step
• 14 Inch Wheels
• 15 Inch Wheels
• 9 Inch Wide
• 65 Inch Long
• Aluminum
• For Tandem-Axle Trailers
• Diamond Plate
• CE Smith

Galvanized steel bracket attaches to your trailer's tongue to attach a 5-inch, black rubber spool roller using a roller shaft and cap nuts to support your boat's keel for easy loading and safe transport on your trailer.

• Boat Trailer Parts
• Rollers
• Roller Bracket
• CE Smith

• Trailer Suspension Parts
• Spring Seats
• Car Hauler
• Utility Trailer
• Camper
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

Maintain your axle spindle with this pair of grease seals from CE Smith.

• Trailer Bearings Races Seals Caps
• Seals
• Grease Seals - Single Lip
• 1.500 Inch I.D.
• 2.328 Inch O.D.
• CE Smith

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Double Eye Springs
• Single Axle
• CE Smith

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 9 Inch Wide
• 32 Inch Long
• Steel
• For Single-Axle Trailers
• Gray
• CE Smith

• Boat Trailer Parts
• Rollers
• Bow Roller
• 3 Inch Diameter
• 3 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner and outer bearings (LM67048), inner and outer races (LM67010), grease seal (16306A), and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 1.250 Inch I.D.
• Bearing LM67048
• Race LM67010
• CE Smith

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 14 Inch Wheels
• 9 Inch Wide
• 66 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

Replacement CE Smith spindle welds onto your trailer axle.

• Trailer Spindles
• Standard Spindle
• 1-1/16 Inch Diameter
• CE Smith

Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.

• Trailer Safety Chains
• Safety Chains
• Towing a Trailer
• 24 Inch Long
• 3500 lbs
• Pair of Chains
• Standard Chains
• CE Smith

Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant aluminum.

• Boat Trailer Parts
• Tie-Down Anchors
• Tie-Down Anchor Brackets
• 3/8 Inch Tall
• 3 Inch Wide
• 5-1/4 Inch Long
• CE Smith

• Boat Trailer Parts
• Rollers
• Keel Roller
• 3 Inch Diameter
• 5 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.

• Boat Trailer Parts
• Bunks
• Bunk Boards
• 4 Inch Tall
• 2 Inch Wide
• 24 Inch Long
• CE Smith

This 3-3/4" long multi-purpose strap measures 2-1/4" from hole to hole. Bolt holes measure 9/16" in diameter. Corrosion-resistant galvanized steel construction.

• Boat Trailer Parts
• Frame Straps
• 1-1/4 Inch Wide
• 3-3/4 Inch Long
• CE Smith

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-7/8 Inch
• 3-7/8 Inch Tall
• CE Smith

Flat plate measures 5" x 1-1/2". Durable galvanized steel plate attaches axle to leaf spring using 3/8" diameter U-bolts (sold separately).

• Trailer Suspension Parts
• U-Bolt Plates
• Boat Trailer
• Snowmobile Trailer
• Round Axle - 2 Inch
• CE Smith

This 2-1/2" diameter roller replaces one of your boat trailer's guide rollers. Made of polyurethane.

• Boat Trailer Parts
• Rollers
• Side Guide Roller
• 2-1/2 Inch Diameter
• 12 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

This stake pocket bracket welds onto your trailer or flatbed truck. The pocket accepts a 2x4 so that you can build a sidewall to keep your cargo in your trailer or truck bed.

• Tie Down Anchors
• Trailer Tie-Down Anchors
• Truck Tie-Down Anchors
• Stake Pockets
• 2 x 4 Stake Pocket
• Surface Mount - Weld-On
• CE Smith

Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.

• Trailer Safety Chains
• Safety Chains
• Towing a Trailer
• 24 Inch Long
• 5000 lbs
• Single Chain
• Standard Chains
• CE Smith

9" Wide x 32" long x 15" tall. Constructed of steel, this round, galvanized fender can be painted to match your trailer. You get both a stylish look and years of use. It bolts to your trailer and fits 15" wheels.

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 9 Inch Wide
• 32 Inch Long
• Galvanized Steel
• For Single-Axle Trailers
• Gray
• CE Smith