New Arrivals

Mechanical thermostat lets you control the heat from your Dometic furnace. Complements your RV's interior with a black casing.

• Accessories and Parts
• RV Furnace
• Thermostat
• Black
• Dometic

Reduce your RV air conditioner startup power demand by up to 75 percent and eliminate that loud, clunking compressor noise. Start and run your AC without the fear of tripping a breaker or overloading your generator.

• Accessories and Parts
• RV AC Soft Start
• RV
• Plug-In
• 20 Amp
• Single AC
• Dometic

If it's time to replace the fabric on your 294" Dometic Deluxe slidetopper awning, this is the replacement you need. It's got a double-sided black vinyl construction and is an exact replacement from Dometic.

• Accessories and Parts
• RV Awnings
• Fabric
• 24 Feet Wide
• Black
• Dometic

Get a factory-fresh look with this Polar White replacement shroud for your Dometic Penguin RV air conditioner. Works with most Penguin AC units.

• Accessories and Parts
• RV Air Conditioners
• Shrouds
• Dometic AC Unit Cover
• White
• Dometic

This user-friendly wall thermostat provides accurate temperature control when used with your Dometic single-zone air conditioning unit (sold separately). Clear digital screen displays current settings.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Dometic

This RV furnace access door provides easy maintenance access and ensures that your furnace has adequate ventilation and airflow. Maintains efficiency and helps prevent issues like carbon monoxide buildup or incomplete combustion. Black color.

• Accessories and Parts
• RV Furnace
• Doors
• Black
• Dometic

Simple, but strong, flat hook for use with 2" utility and tie-down straps. Saddle protects the material and reduces the risk of fraying under load. Rated for a 3,335 lb Load limit.

• Accessories and Parts
• Tie Down Straps
• Hooks
• Flat Hook
• Durabilt

Great for vehicle recovery use in the field, this simple J-style tow hook is easily attached and quickly removed. The 15" long hook has a clevis pin attachment for your Grade 70 (6,600 WLL) or Grade 80 (7,100 WLL) 3/8" chain.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Hooks
• J-Hooks
• Durabilt

Add this slip hook to your 5/16", Grade 70 chain as a secure connector for tying down heavier cargo or equipment. After installing, you can clip the hook onto a fixed point on your equipment or trailer. Integrated, spring-loaded safety latch.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 4700 lbs GTW
• Durabilt

Add this hook to your 3/8" Grade 70 chain to add a secure connection point when tying down heavier cargo or equipment. After installing, use the grab hook to shorten a chain length or attach it to a fixed point on your equipment or trailer.

• Accessories and Parts
• Car Tie Down Straps
• Clevis Hooks
• 6600 lbs GTW
• Durabilt

Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Replaces the left-side drop axle wheel carrier assembly for your Demco Kar Kaddy 3 (DM9713046) or Kar Kaddy SS (DM9713045 or 9713049) tow dolly.

• Accessories and Parts
• Trailers
• Tow Dolly Parts
• Wheel Carriers
• Demco

Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.

• Accessories and Parts
• Trailers
• Hardware
• Bushings
• Demco RV

Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).

• Accessories and Parts
• Gooseneck Coupler
• Outer Tube
• Demco

Replace a worn or damaged clevis on your Demco Excali-Bar tow bar (9511006) with this exact-fit part. Built to keep your tow bar securely attached to your base plate, it restores the solid link your flat towing setup relies on.

• Accessories and Parts
• Tow Bar
• Clevis
• Excalibar
• Demco

Demco's eZ-Latch coupler latch is now available for your gooseneck trailer! This gooseneck coupler head assembly welds onto the stem of your trailer.

• Accessories and Parts
• Gooseneck Coupler
• Head
• Demco

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter