New Arrivals

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Bunk Carpet
• Bunk Carpet Slides
• 3 Inch Wide
• 15 Inch Long
• Caliber

Studded tracks won't tear up the deck of your trailer with this kit installed. This mat adds some traction and protects your deck from water too, so you don't have to worry about rot. Includes installation hardware.

• Snowmobile Trailer Parts
• Traction Surface
• Traction Mats
• 54 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Snap together for a floating floor, or screw down for a partial floating or fixed floor.

• Utility Mat
• Trailer Flooring
• 18L x 9W Inch
• Plastic
• 9 Square Feet
• Black
• Caliber

A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.

• Boat Trailer Parts
• Bunks
• Bunk Carpet
• 6 Inch Wide
• 16 Feet Long
• Caliber

Loading your snowmobile with these guides will be as satisfying as laying first tracks in fresh, untouched powder. Protects your sled and trailer from damage while loading. Interlocks so you can customize your setup.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 8 Pack
• 10 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Snap together for a floating floor, or screw down for a partial floating or fixed floor.

• Trailer Flooring
• Utility Mat
• 18L x 9W Inch
• Plastic
• 27 Square Feet
• Gray
• Caliber

When we decided to offer an etrailer hard, folding tonneau cover, we knew we wanted an affordable cover that would look great on your vehicle. It may not have all the flashy extras, but it's a quality cover that provides a lot of value.

• Tonneau Cover
• Fold-Up - Hard
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Hard Plastic and Fiberglass
• Matte
• etrailer

Revolutionize the way you load up! These game-changing transition plates let you roll your gear from the ground right onto your trailer floor. Fit most enclosed trailers, making them the perfect upgrade if you're looking to save time and energy.

• Trailer Door Parts
• Transition Plates
• Bolt-On
• Steel
• etrailer

Throw this storage cover over your fifth-wheel toy hauler to protect it while you're storing it for the season. The contoured cover conforms to the shape of your fifth wheel and secures with the integrated straps so it won't flap in the wind.

• RV Covers
• Storage Covers
• 5th Wheel Cover
• Toy Hauler Cover
• Driver Side Access
• Passenger Side Access
• Best UV/Dust/Weather Protection
• Gray
• etrailer

Hit the road with confidence! Whether towing a camper, hauling gear, or getting the job done, this hitch is built for adventure. A fourth layer of matte black powder coating resists corrosion, ensuring strength and durability for every journey.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 600 lbs TW
• 4000 lbs GTW
• 4000 lbs WD GTW
• 600 lbs WD TW
• Concealed Cross Tube
• etrailer

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 4200 lbs Axle
• 5200 lbs Axle
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 15123 and 25580
• Race 25520 and 15245
• 6000 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

This 3-quart hydraulic pump makes operating dump trailers and other systems easy, letting you lift, lower, or let things down by gravity. It comes with a handy handheld pendant with a removal cord and start solenoid.

• Dump Trailer Parts
• Hydraulic System
• Hydraulic Pumps
• 3 Qt
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• For 5200 lbs Axles
• For 6000 lbs Axles
• 8 on 6-1/2 Inch
• 17 Inch Wheel
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Round trailer axle beam measures 91" from hub face to hub face and 74-1/2" from spring center to spring center. E-Z Lube spindles simplify bearing maintenance. Axle includes welded spring seats, brake flanges, and spindles.

• Trailer Axles
• Leaf Spring Suspension
• Standard Grade
• No Hubs
• 4400 lbs
• Spindles Only
• 91 Inch Hub Face
• No Drop or Lift
• Dexter

Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• 5th Wheel Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Standard Grade
• Dexter

Tilt deck kit makes loading and unloading vehicles easier without ramps. Includes cylinder assembly, hydraulic fittings, supports, clamps, hinges, and safety signs.

• Dump Trailer Parts
• Lifting System
• Tilt Deck Kits
• Dexter Axle

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• Oil Bath
• ABS
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• 16 Inch Wheel
• 17 Inch Wheel
• Dexter

Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.

• Trailer Brakes
• Disc Brakes
• Marine Grade
• 5 on 4-1/2 Inch
• Rotor
• 3500 lbs Axle
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 02675 and 25580
• Race 25520 and 02420
• 8000 lbs Axle
• 7200 lbs Axle
• Dexter

Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• 7000 lbs Axle
• Dexter

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• 5th Wheel Trailer
• Gooseneck Trailer
• Dump Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Weld-On
• With Rectangle Foot
• Dexter