New Arrivals

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton

Replaces the anti-rattle hitch pin for your Benton rack (B54VR, B82FR, B54FR, B34FR, and B94FR).

• Accessories and Parts
• Hitch Bike Racks
• Pins and Clips
• Pins
• LittleShift
• Shifts&Grins
• ShiftShow
• Benton

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

This replacement base fits your B&W Companion fifth-wheel trailer hitch. Adjustable arms have polyurethane bushings for hitch head (sold separately) to ride on, resulting in less rattle and noise.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.

• Accessories and Parts
• Gooseneck Hitch
• Hitch Only
• 30000 lbs GTW
• Turnover Ball Gooseneck
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Weight Distribution Hitch
• Locks
• Locking Pin
• B and W

This sturdy carbon-steel hitch ball is designed for use with B&W Continuum weight-distribution systems. Features 2-1/2" long x 1-1/4" diameter shank and 8,000-lb maximum GTW rating.

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Ball
• B and W

Your hitch is the muscle behind every haul. But even the toughest gear has a weak spot. One pulled pin and your Tow & Stow could disappear. This tough little lock secures the adjustment pins and keeps your setup looking sleek and secure.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Locks
• Locking Pin
• B and W

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Replacement head assembly works with Blue Ox SwayPro weight distribution systems for trailers with underslung couplers. Includes replacement hardware.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Blue Ox

If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.

• Accessories and Parts
• Flat Tow Wiring Harness
• Auto Battery Disconnect
• Blue Ox

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox