If your AC is running and you trip a breaker by turning on an appliance, this soft start fixes that. It's hardwired for security and keeps your RV safe from surges. And it lets you monitor power in real time from your phone.
Never get startled by a noisy AC again. ActiveStart makes your small home or marine AC start up quietly and smoothly, even during storms or power outages. And with Bluetooth monitoring, you can check your system's health from your phone.
Replaces the worn out surge protection board in your 50 amp Active Controls ActiveStart plug-in soft start for RVs. Works with both plug-in and hardwired versions.
If your AC is running and you trip a breaker by turning on an appliance, this soft start fixes that. It's hardwired for security and keeps your RV safe from surges. And it lets you monitor power in real time from your phone.
Replaces the worn out surge protection board in your 30 amp Active Controls ActiveStart plug-in soft start for RVs. Lets you continue to use your ActiveStart with surge protection once the old one absorbs damaging voltage surge.
If you keep tripping breakers while your AC runs, this soft start will keep your AC from drawing too much power at startup. It also protects your rig from surges, has a replaceable surge module, and supports remote firmware updates.
If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.
From trail to tailgate, these color-changing, solar string lights set the mood and keep the party lit. Shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/16" chains. 4,400-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/2" chains. 11,900-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/4" chains. 3,300-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/8" chains. 18,000-lb Load limit.
Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.
Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.
EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.
Tired of cranking, bouncing, or backing in too deep at the ramp? Slydz-On helps your boat slide off and onto your trailer bunks smoother, without the mess of grease or installing rollers. Just spray it on, let it dry, and let it work.
Weight distribution hitches are heavy, awkward, and usually a little greasy. Instead of cramming yours into a clean storage bay or losing it in the garage, this bolt-on bracket mounts to a trailer's A-frame to keep your gear secure between trips.
Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 2-step with 19-1/2" treads. Applies quickly and easily with adhesive backing.
Replaces the mounting hinge plate for your MORryde Step Above RV Entry 2 steps (STP-202-MH-226-09). Pairs with hinge pins (MR76RV - sold separately) to install your steps in the doorway of your RV.