New Arrivals

Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.

• Accessories and Parts
• Trailer Brakes
• Brake Shoes
• Dexter

Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

Synthetic rope can be used replace an existing rope, or serve as a upgrade on some winches. The synthetic generates less kinetic energy than steel, protecting you and your equipment if a break occurs. Soft shackle end for versatile pull options.

• Accessories and Parts
• Electric Winch
• Ropes
• 3/8 Inch Diameter
• Synthetic Rope
• Erickson

Replaces the 2" hitch ball for your Curt Switch ball trailer ball set with a 1-1/8" neck.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Balls
• 2 Inch Ball
• CURT

Replaces the clevis pin and clip for your Curt TruTrack 2P trailer-mounted weight distribution system (17510). Secures hitch head to shank-and-horn assembly.

• Accessories and Parts
• Weight Distribution Hitch
• Pins and Clips
• Pins
• CURT

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 6".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replace the clevis for your Brake Buddy portable supplemental braking system.

• Accessories and Parts
• Flat Tow Brake System
• Pedal Clamp
• Brake Buddy

Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.

• Accessories and Parts
• Smart RV
• Handles
• B and B Molders

Replaces the prop that keeps your B&B docking station's door open and out of the way while you hook up your water connections.

• Accessories and Parts
• RV Water Inlets
• Door Prop
• B and B Molders

Replaces pump indicator light for B&B RV Nautilus P3 or P4 panel water management panel. Replaces faulty indicator light on Nautilus panel face. Comes as single part consisting of connector, housing, and bulb.

• Accessories and Parts
• Smart RV
• Lights
• B and B Molders

Replaces a diverter valve plumbing assembly on your B&B water control panel. Works with diverter system on all water centers from B&B. Consists of a diverter T-fitting and 1/2" MPT fittings.

• Accessories and Parts
• Smart RV
• Diverter Valve
• B and B Molders

Replaces the spacer for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.

• Accessories and Parts
• Smart RV
• Handles
• B and B Molders

Replaces the rocker power switch on Nautilus water control panels. White switch body matches panel color. Red switch cover illuminates when switched on.

• Accessories and Parts
• Smart RV
• Switches
• B and B Molders

Replaces pump indicator light for B&B RV Nautilus P3 or P4 panel water management panel. Replaces faulty indicator light on Nautilus panel face. Comes as single part consisting of connector, housing, and bulb.

• Accessories and Parts
• Smart RV
• Lights
• B and B Molders

Replaces the retainer clip that holds the city water connection securely in place on the back of your Nautilus panels. Works with all Nautilus panels.

• Accessories and Parts
• Smart RV
• Mounting Hardware
• Retention Clip
• B and B Molders

Replaces a diverter valve plumbing assembly on your B&B water control panel. Works with diverter system on all water centers from B&B. Consists of a diverter T-fitting and PEX fittings.

• Accessories and Parts
• RV Water Inlets
• Diverter Valve
• B and B Molders

Get total theft protection for your BulletProof Hitches adjustable ball mount with these 3 locking pins. Pins secure your ball mount, ball platform, and pintle lock to your vehicle. Stainless steel and black powder coat resist corrosion. Keyed alike.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• BulletProof Hitches

Increase your towing comfort. Polyurethane bushings built into this dual ball mount absorb vibration and reduce road shock for a smoother ride. Installs into your existing BulletProof adjustable ball mount with included hitch pins and clips.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Ball Mounts
• BulletProof Hitches

Install this simple clamp to prevent movement between your ball hitch and the BulletProof Hitches receiver hitch channel. Recessed bolt tightens the clamp down, and also makes it harder to remove, improving overall security. Offset wrench supplied.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Clamps
• BulletProof Hitches

Stainless steel plate protects your mud flap from melting due to the heat from your truck's exhaust. Perfect for a modified rear exhaust outlet near your mud flap. Easy installation with included hardware.

• Accessories and Parts
• Mud Flaps
• Heat Shield
• BulletProof Hitches