Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.
Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.
This 7-way to SAE cable connects your vehicle with a 7-way RV style connector to a SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.
You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.
You've got gear that needs hauling and no time to mess with adapters. Drop in the receiver attachment and run your winch, pintle, or cargo rack without swapping hitches. It's quick, solid, and built to get things done.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/16" chains. 4,400-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/2" chains. 11,900-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/4" chains. 3,300-lb Load limit.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/8" chains. 18,000-lb Load limit.
Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.
Restore your Dutton-Lainson StrongArm DC electric winch's functionality with this Switch Pocket Replacement Kit. Includes all necessary hardware for a complete and secure repair.
This fitting replaces the 1/4" pushlock to male 1/8" NPTM fitting for your Demco Air Force One supplemental braking system. Straight design allows for streamlined routing of your air line.
Restore safe towing with this 2" ball coupler for your Demco DA70 actuator. Replaces worn or damaged coupler and bolts directly to the actuator housing.
Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.
Replaces the fuse holder for your Demco Stay-IN-Play Duo (SM99251 or SM99243) or Air Force One (9599007, 9599019, 9599020, or 9599021) supplemental braking system.
Replaces the 2-5/16" coupler for your Demco Recon Gooseneck to 5th wheel hitch adapter base (DM6021). Provides the attachment point for the gooseneck ball in your truck bed.
Lost a fender on the road or cracked it backing into a tight spot? This replacement passenger's-side fender assembly gets your Demco KarKaddy SS or KarKaddy 3 tow dolly looking sharp and road-ready again.