New Arrivals

Mount a 3/4" round trailer light with this flush bracket. Compatible with dozens of Optronics LED models. Black plastic housing resists corrosion. Surface mount design installs easily. Light and mounting hardware sold separately.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Grommet
• Diamond
• Optronics

Black, heavy-duty plastic license plate bracket lets you mount your plate on a flat surface. Durable design handles exposure to the elements. Easy bolt-on installation. No light or wiring included.

• Accessories and Parts
• License Plates and Frames
• Mounting Hardware
• Brackets
• Optronics

Replace lost or damaged hardware for your MaxxAir MaxxFan Deluxe roof vent fan. Designed for a perfect fit with all MaxxAir MaxxFan Deluxe models.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• MAXXAIR

This recovery ring increases the pulling power of your winch in a double line pull or lets you change the direction of your single line pull. Works with Maxtrax synthetic winch rope and soft shackles. 55,114 lbs breaking strength.

• Accessories and Parts
• Electric Winch
• Recovery Ring
• Maxtrax

Replaces the lid spring for your MAXXAIR MaxxFan Deluxe RV roof vent. Works with all MaxxFan Deluxe RV roof vents.

• Accessories and Parts
• RV Vents and Fans
• Hardware
• Springs
• MAXXAIR

We curated this compact winch recovery kit to replace your heavy, steel setup. The whole kit weighs a mere 22 lbs and includes a synthetic winch rope, shackles, and everything else you need to make safe, effective recoveries. Includes carry bag.

• Accessories and Parts
• Tow Shackles
• Tow Straps and Recovery Straps
• Recovery Strap
• Polyethylene
• 30 Feet Long
• Extra Heavy Duty
• Maxtrax

Replaces 1 fan blade for your MaxxAir fan. Fits all MaxxFan fan models.

• Accessories and Parts
• RV Vents and Fans
• Roof Vent
• Fan Blade
• MAXXAIR

Imagine being on a road trip and not worrying about the gear on your cargo carrier getting swiped when you make a pit stop. The etrailer cargo carrier cage can make that dream a reality, letting you focus on your trip and worry less about your stuff.

• Accessories and Parts
• Hitch Cargo Carrier
• RV Cargo Carrier
• Flat Carrier Parts
• Cargo Cage
• etrailer

Replace the power unit for your etrailer or Ram hydraulic trailer jack or scissor hoist system. Dual-action system powers both up and down. Reservoir has 8-qt capacity. Includes remote control.

• Accessories and Parts
• Trailer Jack
• Power Unit
• etrailer

Lost the key to your etrailer tongue tool box? Don't worry, we've got you covered. Replaces 1 key number CH503.

• Accessories and Parts
• Trailer Tongue Box
• Trailer Tool Box
• Keys
• etrailer

10-1/2" x 13-3/4". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Covers
• etrailer

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.

• Accessories and Parts
• Trailer Jack
• Electric Winch
• Caps
• Dexter

Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 8000 lbs
• 7000 lbs
• Caliper Parts
• Hardware
• Bolts
• Dexter