Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.
This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.
Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.
Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.
Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.
Put a quick disconnect on your RV, supply hose, appliance, or anywhere else you want one. There's a variety of uses, and this kit gives you both male and female connectors to adapt 1/4" NPT fittings.
Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.
Expand your outdoor kitchen with the ability to run two appliances off a single propane tank. Plug into the Quick Disconnect port on your RV to create two female connectors. Then you can use a cooktop and heater at the same time.
Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.
Connect up to 5 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.
9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.
9" Wide x 65" long x 15" tall. This trailer fender features classic Jeep styling and rugged, rustproof diamond plate aluminum construction. Bolt onto your trailer to help block damaging road debris.
The launch was tricky, but getting back on the trailer is worse. The keel won't center and you're tired from a day on the water. This bracket fixes the angle, steadies the roller, and helps guide your boat home without the struggle.
Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner and outer bearings (LM67048), inner and outer races (LM67010), grease seal (16306A), and a cotter pin.
Required in most states, a safety chain acts as a backup if your trailer becomes disconnected from your tow vehicle. Attach the middle link of this zinc-coated steel chain to your trailer's coupler, and then hook the S-hooks to your hitch.