New Arrivals

This shock-absorbing shank gives you 12 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2300 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 11 Inch Drop
• Gen-Y Hitch

Replaces the locking twist clip on your Gen-Y gooseneck clevis pin. Works with all Gen-Y gooseneck clevis pins. Includes 5 clips.

• Accessories and Parts
• Gooseneck Hitch
• Pins and Clips
• Locking Clips
• Gen-Y Hitch

This shock-absorbing shank gives you 6 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1000 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 6 Inch Drop
• Gen-Y Hitch

Replaces one of the ramps for your Gen-Y Hitch aluminum loading ramp set. Ramp is 7' long and 14" wide. Supports 3,000 lbs. Includes serrated aluminum panels for extra grip.

• Accessories and Parts
• Car Ramps
• ATV Ramps
• Trailer Ramps
• Ramps
• Gen-Y Hitch

Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.

• Accessories and Parts
• Hitch Step
• Trailer Hitch
• Skid Plate
• Gen-Y Hitch

Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into the 2-1/2" stacked receivers providing attachment points for a system head. Secures with included pin and clip.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1500 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Replaces the Y shank on your Gen-Y adjustable stabilizer bar kit. Fits in the back of your 2" stacked receiver and provides attachment points for stabilizer bars.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

This breakaway switch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.

• Accessories and Parts
• Trailer Breakaway Kit
• Switches
• ESCO

Keep your trailer plug off the ground and out of the dirt with this holder. Secures to your trailer and gives you a spot to clip your breakaway cable when it's not in use. Fits 7-way plug.

• Accessories and Parts
• Trailer Wiring
• Wiring
• Custom Fit Vehicle Wiring
• Plug Holder
• ESCO

Designed for your vehicle with a factory tow package, this wiring harness plugs into the quick-connect harness located under your dashboard and into your Hopkins brake controller for easy installation.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• Hopkins

New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.

• Accessories and Parts
• Hitch Bike Racks
• Lock Parts
• Wheel Locks
• Crosstrack
• Hollywood Racks

If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.

• Accessories and Parts
• Hitch Bike Racks
• Ramps
• Crosstrack
• Hollywood Racks

Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.

• Accessories and Parts
• RV and Camper Bike Racks
• Hitch Bike Racks
• End Caps
• Sport Rider
• RV Rider
• Hollywood Racks

Cyclings supposed to be about the ride, not fighting with knobs or hunting for tools. These toolless adjustment dials let you switch wheel sizes with a quick twist, so your bike fits snug and you're rolling in seconds.

• Accessories and Parts
• Hitch Bike Racks
• Wheel Holds
• Knobs
• Crosstrack
• Hollywood Racks

Replaces 1 knob for your Hollywood Racks Traveler bike rack (HR8500). Knob has 3" long x 5/16" diameter bolt with 18 threads per inch.

• Accessories and Parts
• Hitch Bike Racks
• Knobs
• Hollywood Racks

Replaces the support bracket for your Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider SE (HR1450E-Z or HR1455E-Z) bike rack. Does not include carriage bolts (sold separately).

• Accessories and Parts
• Hitch Bike Racks
• RV and Camper Bike Racks
• Hardware
• Brackets
• RV Rider
• Sport Rider
• Hollywood Racks

When you're hauling your prized bikes, staying visible matters. This LED bar lights up your brake signals, turn indicators, and flashers, so even if your ride runs past sunset, other drivers know exactly where you are and what you're doing.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Crosstrack
• Hollywood Racks

Early starts, late returns - some adventures just don't stick to daylight hours. The Destination E LED Light Bar helps keep you visible when it counts, making sure other drivers see you, your vehicle, and the gear you're hauling.

• Accessories and Parts
• Hitch Bike Racks
• Lights
• Light Bar
• Destination
• Hollywood Racks

Replaces the main beam for your Hollywood Racks RV Rider bike rack (HR1600 or HR1700). Does not include the endcap reflector or sleeve.

• Accessories and Parts
• Hitch Bike Racks
• Shanks and Adapters
• Main Assembly
• Hollywood Racks

Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• Weld-On
• 5 Mounting Positions
• Brophy

Replaces the 3/16" x 113" long steel aircraft cable for your Brophy cable camper jack with 57" max lift height (CJ41, CJ31, CXHD, or CJ31H).

• Accessories and Parts
• Camper Jacks
• Cables and Cords
• Brophy

Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.

• Accessories and Parts
• Pintle Hitch
• Mounting Hardware
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy