New Arrivals

Forget the mid-trip stops to re-tighten your straps. This tie-down kit locks your ATV or UTV down tight so your trail rig won't bounce loose on those bumpy backroads. And it comes with a carry bag to keep your straps organized.

• ATV-UTV Tie Downs
• Tie Down Straps
• Ratchet Straps
• Trailer
• Snap Hooks
• 2 Straps
• Manual
• 21 - 30 Feet Long
• 1-1/8 - 2 Inch Wide
• 3501 - 6600 lbs
• Caliber

Easily move your snowmobile or snowbike with this track dolly, while also protecting your track and shop floors from damage. Tapered sides work with all track pitches. Oversized caster wheels roll smoothly over various surfaces.

• Winter Weather Supplies
• Snowmobile Dolly
• Caliber

Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.

• Boat Trailer Parts
• Bunks
• Trailer Bunk Carpet
• 6 Inch Wide
• 3000 Inch Long
• Caliber

Streamline loading and unloading your sled with these low-profile, friction-reducing trailer glides. Protects your deck from damage your carbides could cause and lets you steer easily while loading. And they interlock so you can customize your setup.

• Snowmobile Trailer Parts
• Traction Surface
• Glides
• 16 Pack
• 30 Inch Long
• Caliber

This flooring protects your trailer or garage floor from your outdoor toys. And it protects your stuff by getting it off the floor and letting it air out. Has traction for off-road gear while still providing a slick surface for snowmobiles.

• Trailer Flooring
• Utility Mat
• 18L x 9W Inch
• Plastic
• 27 Square Feet
• Gray
• Caliber

You won't have to stand on the icy or wet deck of your trailer while securing your sled with this clamp. Extended ski pads work well for wide ski stances. Clamp lets you easily adjust the amount of pressure placed on your skis from the ground.

• Snowmobile Trailer Parts
• Clamps
• 46 Inch Long
• Caliber

Tired of fighting with sticky bunks? Skip the carpet replacement with these marine slides from Caliber. They just screw over your carpet to help your boat glide off and onto the trailer with less strain, but let you keep the traditional look.

• Boat Trailer Parts
• Bunks
• Slides
• 1-1/2 Inch Wide
• 15 Inch Long
• Caliber

Be seen with this 3/4" round LED. The red diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

1-1/16" LED can be both a side marker and clearance light. It mounts with the built-in grommet. Plug-in installation with 0.180" bullet connectors.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Round
• Recessed Mount
• 1-1/16 Inch Diameter
• Amber
• Peterson

Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Stop
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

6-1/2" x 2-1/4" Waterproof LED displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and works with AMP-style plugs.

• Trailer Lights
• Tail Lights
• Turn
• Tail
• Stop
• Oval
• Recessed Mount
• Submersible Lights
• 6-1/2L x 2-1/4W Inch
• Red
• Peterson

Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V and 24V systems.

• Trailer Lights
• Tail Lights
• Turn
• Round
• Recessed Mount
• Non-Submersible Lights
• 4 Inch Diameter
• Amber
• Peterson

Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

Be seen with this 3/4" round red LED light for clearance or side marking. Mounted in a UV-resistant bracket for easy installation on flat surfaces. Quick wiring with an 8", stripped, 2-wire pigtail - just connect and go. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Surface Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

Adds a reflector to your trailer so you can tow safely and legally.

• Trailer Lights
• Reflectors
• Rectangle
• Surface Mount
• 4-3/8L x 1-1/8W Inch
• Red
• Peterson

Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V and 24V systems.

• Trailer Lights
• Tail Lights
• Turn
• Round
• Recessed Mount
• Non-Submersible Lights
• 4 Inch Diameter
• Amber
• Peterson

Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Amber
• Peterson

2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with included grommet. Accepts industry-standard sealed plug. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 2 Inch Diameter
• Amber
• Peterson

1-1/16" LED can be both a side marker and clearance light. It mounts with the built-in grommet. Plug-in installation with 0.180" bullet connectors.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• 1-1/16 Inch Diameter
• Red
• Peterson

Be seen with this compact 3/4" LED. Clear lens is perfect for clearance or side marking and fits snug in a recessed mount with the included grommet. Quick, 2-wire hookup. Sealed and submersible - great for boat trailers! PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• White
• Peterson

2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Surface mount with black flange. Accepts industry-standard sealed plug. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Surface Mount
• Submersible Lights
• 2-15/16 Inch Diameter
• Amber
• Peterson

Adds a reflector to your trailer so you can tow safely and legally.

• Trailer Lights
• Reflectors
• Round
• Surface Mount
• 2-3/8 Inch Diameter
• Red
• Peterson

Versatile 3/4" amber LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. Quick wiring with an 8", 3-wire pigtail - just connect and go. PC rated.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Stop
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Amber
• Peterson

Be seen with this compact 3/4" LED. Clear lens is perfect for clearance or side marking and fits snug in a recessed mount with the included grommet. Plug-and-play, 2-wire design. Sealed and submersible - great for boat trailers! PC rated.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• White
• Peterson