New Arrivals

Specialty-series ratchet binder built for securing compactors has grab hook and clevis ends for connecting to anchor points. You can use this binder for hauling other cargo by adding transport chains and hooks (sold separately). 7,300-lb Load limit.

• Car Tie Down Straps
• Chain Binders
• Tie Down Straps
• Ratchet Chain Binder
• Grab Hooks
• Jaw Fittings
• 7300 lbs
• 15-1/2 Inch Handle
• 3/8 Inch Chain Links
• Red
• Durabilt

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Double Eye Springs
• 3500 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Painted
• Dexter

This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.

• Trailer Brake Controller
• Proportional Controller
• Electric
• Splice-In
• Under-Dash Box
• Under-Dash
• LED Display
• Single Trailer Only
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• Dexter

Replacement bearing kit for Dexter Axle Nev-R-Lube axles

• Dexter Axle

Smooth and powerful hydraulic jack upgrades your existing hydraulic setup to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Dump Trailer
• 5th Wheel Trailer
• Utility Trailer
• Gooseneck Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Bolt-On
• With Rectangle Foot
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 4000 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Painted
• Dexter

Grease caps fit trailer hubs with 2.72" inner diameter and has corrosion-resistant zinc plating

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• Dexter Axle

Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.

• Trailer Suspension Parts
• U-Bolt Plates
• Snowmobile Trailer
• Boat Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 2500 lbs
• 1-3/4 Inch Wide
• 25-1/8 Inch Long
• Painted
• Dexter

Get smooth, reliable braking with this Dexter hydraulic drum brake kit. Designed for 9K-10K axles, these self-adjusting brakes reduce maintenance while delivering strong stopping power. Assemblies include parking brake levers for extra control.

• Trailer Brakes
• Hydraulic Drum Brakes
• Standard Grade
• Dual Servo
• Self Adjust
• 12-1/4 x 3-3/8 Inch Drum
• 9000 lbs Axle
• 10000 lbs Axle
• 16 Inch Wheel
• 15 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 5,200-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Double Eye Springs
• 5200 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Painted
• Dexter

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• Universal Fit
• Drop - 4 Inch
• Dexter

Already have a Dexter adjustable-channel actuator? Change or replace your coupler with this low-profile latch. It features an over-center latch mechanism that only engages when the coupler is fully seated on your hitch ball.

• Adjustable Trailer Coupler
• Coupler Only
• 7700 lbs GTW
• 2 Inch Ball Coupler
• Dexter

Grease caps fit trailer hubs with EZ lube spindles 2.72" inner diameter and has corrosion-resistant zinc plating

• Trailer Bearings Races Seals Caps
• Caps
• EZ Lube Grease Cap
• 2.72 Inch O.D.
• Dexter Axle

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Utility Trailer
• Dump Trailer
• 5th Wheel Trailer
• Enclosed Trailer
• Gooseneck Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Bolt-On
• With Rectangle Foot
• Dexter

Use this with actuators or standard couplers to build a foldaway tongue that tucks your trailer neatly out of the way, perfect for tight garages. Weld-on mounting creates a clean look. Easy storage, clean style, and solid function.

• Folding Trailer Tongue
• Coupler Hinge Kit
• Weld-On
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 3500 lbs
• 1-3/4 Inch Wide
• 23-1/8 Inch Long
• Painted
• Dexter

Lift kit raises your trailer frame by 2-7/8". Kit includes spacers and mounting hardware for single axle applications. Compatible with side-mounted #11 Torflex axles with 4,100-6,000-lb capacities.

• Trailer Suspension Parts
• Alignment and Lift Kits
• Boat Trailer
• Car Hauler
• Snowmobile Trailer
• Camper
• Utility Trailer
• Single Axle
• Dexter

Grease caps fit trailer hubs with 1.99" inner diameter and has corrosion-resistant zinc plating.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 1.99 Inch O.D.
• Dexter Axle

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649
• Race L44610
• Dexter

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• Utility Trailer
• 5th Wheel Trailer
• Dump Trailer
• Enclosed Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Bolt-On
• With Rectangle Foot
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 2500 lbs
• 1-3/4 Inch Wide
• 23-1/8 Inch Long
• Painted
• Dexter