New Arrivals

Connect up to 2 appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

This adapter is required to use your JR Products LP Gas Manifold. 1/2" Manifold x 1/4" NPT adapter screws onto your existing RV manifold hose so you can simply plug it in to your manifold block.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• JR Products

Use this adapter fitting to create a connection point on your appliance for a quick-disconnect hose. 1/4" Male NPT fitting threads onto propane hoses or directly onto appliances for simple hookups without hand tightening.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male NPT
• 1/4 Inch - Female NPT
• JR Products

Replace the broken catch on your storage doors with strong and simple magnets. Includes two magnets per set and mounting hardware. A great upgrade if you're done fumbling around with those manual, hook-style catches.

• RV Door Parts
• Compartment Door
• Holders
• Magnetic
• Black
• JR Products

Connect up to 3 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Put a quick disconnect on your RV, supply hose, appliance, or anywhere else you want one. There's a variety of uses, and this kit gives you both male and female connectors to adapt 1/4" NPT fittings.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Female NPT
• 1/4 Inch - Male NPT
• JR Products

Connect up to 4 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Expand your outdoor kitchen with the ability to run two appliances off a single propane tank. Plug into the Quick Disconnect port on your RV to create two female connectors. Then you can use a cooktop and heater at the same time.

• Propane Fittings
• Adapter Fittings
• 1/4 Inch - Male QD
• 1/4 Inch - Female QD
• JR Products

Pigtail makes the connection from the propane tanks on your trailer to the propane regulator. Also used to connect tanks to a high-pressure regulator to carry gas to a 2-stage regulator.

• Propane Fittings
• Hoses
• Pigtail Hoses
• 1 Foot Long
• Type 1 - Female
• 1/4 Inch - Male NPT
• JR Products

Connect up to 5 propane appliances to your RV's LP gas line with this simple plug and go manifold - no frustrating teflon tape needed! Enjoy the flexibility of powering up your appliances from one central point while minimizing safety risks.

• Propane Fittings
• Manifolds
• JR Products

Pendant fixture has a wire-caged open frame that adds artsy, accented light over your RV dinette table or kitchen counter for prepping and enjoying a family dinner. Energy-efficient LEDs last longer and burn brighter than incandescent bulbs.

• RV Light Fixtures
• RV Interior Lights
• Pendant Light
• No Switch
• Surface Mount
• LED Light
• 13-1/2L x 6-1/2W Inch
• Black
• Gustafson Lighting

Industrial-style running boards give your vehicle a tough, rugged vibe. They are built to last, add extra grip for safety, and make getting in and out easier. The open grid design lets mud fall through to keep your cab clean after a hard day at work.

• Nerf Bars - Running Boards
• Running Boards
• Rectangle
• 6 Inch Wide
• Cab Length
• Powder Coat Finish
• Steel
• Black
• Gen-Y Hitch

Industrial-style running boards give your vehicle a tough, rugged vibe. They are built to last, add extra grip for safety, and make getting in and out easier. The open grid design lets mud fall through to keep your cab clean after a hard day at work.

• Nerf Bars - Running Boards
• Running Boards
• Rectangle
• 6 Inch Wide
• Cab Length
• Powder Coat Finish
• Steel
• Black
• Gen-Y Hitch

If you trade off between towing your gooseneck trailer and a 5th wheel, you know the pain of hauling the 5th-wheel hitch in and out of your truck bed. Save time, and your back, with this combo hitch that allows you to swap between the two with ease.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 25000 lbs GTW
• Gen-Y Hitch

Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 6 Inch
• 32000 lbs GTW
• Stacked Receivers
• Shock Absorbing
• Built-In Pintle Hook
• Gen-Y Hitch

This shock-absorbing pin box provides a smooth, safe ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. The weight scale lets you monitor your vertical load. 8.5K pin weight.

• 5th Wheel Pin Box
• Upgraded Pin Box
• Absorbs Road Shock and Reduces Chucking
• 30000 lbs GTW
• Lippert 1621
• Lippert 1621HD
• Gen-Y Hitch

If you trade off between towing your gooseneck trailer and a 5th wheel, you know the pain of hauling the 5th-wheel hitch in and out of your truck bed. Save time, and your back, with this combo hitch that allows you to swap between the two with ease.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 25000 lbs GTW
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, van, or cargo area with this hitch-mounted step. 42" Wide step provides room for 2 people. Slides into your 2" hitch receiver. Serrated surface helps keep you from slipping off the step.

• Hitch Step
• Truck Bed Step
• Fixed Step
• Standard Step
• 3 Inch Deep
• 600 lbs
• 42 Inch Wide
• Steel
• Gen-Y Hitch

Insert this shock-absorbing, adjustable pintle plate mount into your hitch to get 7 mounting positions for your pintle hook. Flexing rubber cords limit shock. Included stabilizer deters wobble.

• Pintle Hitch
• Pintle Mounting Plate
• 21000 lbs GTW
• 2-1/2 Inch Hitch Mount
• Cushioned Shank
• Gen-Y Hitch

Get easy access to your truck bed, roof rack, or cargo area with this hitch-mounted step. Slides into your 2-1/2" hitch receiver with 3/4" accessory pin holes. Serrated surface helps keep you from slipping off the step.

• Truck Bed Step
• Hitch Step
• Fixed Step
• Standard Step
• 2 Inch Deep
• 500 lbs
• 13 Inch Wide
• Steel
• Gen-Y Hitch

Insert this heavy-duty mount into your 2-1/2" hitch to get 7 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Stabilizer kit ensures load is well distributed.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Gray
• Drop - 18 Inch
• 21000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch

If you trade off between towing your gooseneck trailer and a 5th wheel, you know the pain of hauling the 5th-wheel hitch in and out of your truck bed. Save time, and your back, with this combo hitch that allows you to swap between the two with ease.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 25000 lbs GTW
• Gen-Y Hitch

• Trailer Hitch Ball Mount
• Fixed Ball Mount
• One Ball
• Steel Shank - Matte Black
• 7000 lbs GTW
• Shock Absorbing
• Gen-Y Hitch

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs.

• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Gray
• Drop - 7 Inch
• Rise - 2 Inch
• 16000 lbs GTW
• Stacked Receivers
• Built-In Pintle Hook
• Gen-Y Hitch