bing tracking image
  1. Trailer Hitch Ball Mount
  2. Gen-Y Hitch
  3. Adjustable Ball Mount
  4. Fits 2 Inch Hitch
  5. Drop - 7 Inch
  6. Rise - 2 Inch
Gen-Y Adj 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 2-1/2" R/7-1/2" D - 16K
Gen-Y Hitch

Gen-Y Adj 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 2-1/2" R/7-1/2" D - 16K

Part Number: GY32NR
In Stock
$374.99
Trailer Hitch Ball Mount
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs. Great Prices for the best trailer hitch ball mount from Gen-Y Hitch. Gen-Y Adj 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 2-1/2" R/7-1/2" D - 16K part number GY32NR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (108)
  • Q & A (0)
  • Videos (1)
  • Photos

Gen-Y Hitch Trailer Hitch Ball Mount - GY32NR

  • Adjustable Ball Mount
  • Fits 2 Inch Hitch
  • Drop - 7 Inch
  • Rise - 2 Inch
  • 2 Inch Ball
  • 2-5/16 Inch Ball
  • Two Balls
  • 16000 lbs GTW
  • Built-In Pintle Hook
  • Stacked Receivers
  • Gen-Y Hitch
  • Steel Shank - Gray
  • Steel Ball

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs.


Features:

  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
  • 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
    • 2 Pins included to secure accessories to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


Specs:

  • Built-in receiver size: 2" x 2"
  • Maximum drop: 7-1/2"
  • Maximum rise: 2-1/2"
  • Gross towing weight: 16,000 lbs
  • Maximum tongue weight: 2,000 lbs
  • Overall height: 13-3/16"
  • Hitch pin hole diameter: 5/8"
    • Distance between pin holes on shank: 1"
  • Distance from center of first pin hole to center of ball: 11-7/8"
  • Distance from center of second hitch pin hole to end of shank: 1-1/4"
  • Designed for 1.5 or smaller lunette rings
  • Limited lifetime warranty


GH-225 GenY Hitch MEGA DUTY Adjustable Versa Ball Mount with Pintle Lock for 2" Hitch Receivers - 7.5" Drop/2.5" Rise - 16,000 lbs





Video of Gen-Y Adj 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 2-1/2" R/7-1/2" D - 16K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Gen-Y Hitch Trailer Hitch Ball Mount - Adjustable 2 Ball 2 Inch Stacked Receivers - GY32NR

Hi everybody, Andy here with etrailer.com. Let's take a look at this Gen Y adjustable two ball mount with these two inch stacked receivers. Now this adjustable ball mount is going to let you hook up your trailer to your tow vehicle, and this shank is gonna slide into your two inch hitch receiver on your vehicle. And then the two inch or the 2 5/16 inch hitch balls are gonna give you that connection point that you need for your trailer coupler. These five stacked two inch receivers are going to accept this included ball mount and pinto lock, which I'll show you in a second, as well as other hitch mounted accessories. Two pins and clips are included to secure your accessories with the ball mount to these stacked receivers.

And when you use this with a lunette ring with the pinto lock, this 2 5/16 inch hitch ball is designed for 1.5 inch or smaller lunette rings. Now let me give you a brief demonstration of how that pinto lock works. So again, the lunette ring is gonna work with the 2 5/16 inch hitch ball. You're gonna go ahead and place the lunette ring over the ball and then remove the pin and clip. And then that's going to give you the ability to extend the pinto lock and then you'll just replace the pin and clip and then that'll secure the lunette ring around that ball.

And then when you're ready to remove the lunette ring, you'll pull the pin and clip again and just retract that pinto lock. You can remove the ring and then use this for your standard coupler. This can also be removed as well if you wanna use this receiver. So it's very adjustable, you can move it down to one of the other unused receivers when you don't need to use it or just completely remove it. But that is a nice feature that they include with this.

The accessory pinhole diameter is 5/8 of an inch, and this is going to give you a maximum drop of about seven and a half inches and a maximum rise of about two and a half inches. The adjustable height is obviously gonna let you tow trailers of different heights with the same vehicle. The ball mount will lower or rise to match whatever level you're looking for for that even level ride. This has a gross towing weight of 16,000 pounds and a maximum tongue weight of 2,000 pounds. And just to give you some other measurements that might prove helpful for you, I'm gonna go ahead and retrieve my tape measure here.

And I want to begin by measuring the distance from the center of the balls to the center of these hitch pin holes. So let me see how well I can line this up for you on camera so you can get a pretty good look at it. Let me see if I can bring it down here. So lining up from the center of the balls to the center of that first hitch pin hole, we're sitting pretty close to 11 7/8 inches, and then to the second hitch pin hole, again to the center of that hole, about 12 7/8 inches. And then from the distance of our second hitch pin hole, the center of the second hitch pin hole to the end of the shank, right at about one and a quarter inches. So hopefully those measurements are helpful for you. The overall height, let me see if I can put a tape measure up to this real quick. This says about 13 inches or so, but if that ball comes up a little bit higher if you use the the highest receiver, that's gonna make the height just a little bit taller as I'm sure you can understand. But I just kind of wanted to give you an idea of the size, the kind of clearance that you might need. This is made here in the USA of a heavy duty steel construction with a zinc primer and powder coat that's going to do a great job of resisting rust and corrosion. As you might know, Gen Y has a great reputation of building solid, robust products, they're one of my favorite manufacturers of hitches and the like. And this is gonna hold up really well for you. They're really known for overbuilding their products, so it's gonna last you a long time. This does have a limited lifetime warranty from Gen Y, and I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.


Customer Reviews

Gen-Y Adj 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 2-1/2" R/7-1/2" D - 16K - GY32NR

Average Customer Rating:  4.7 out of 5 stars   (108 Customer Reviews)

Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs.

by:

This is a well built long lasting hitch.



by:

Its stout and pulls my 7X16 foot enclosed trailer, fully loaded with 8,000 pounds, without any issue. I don't even know that its back there. I have a diesel Ram 2500 with an 8 inch lift and the hitch drops level with the trailer. 5 stars!!



by:

This thing is ideal, and I've used it every way possible.

Be advised, this thing is heavy-duty. It's not for the faint of heart, or anyone with a weak back. It's built to last forever and weighs accordingly.

Great product!



by:

Product is pretty awesome. very well built. We use in the marine shop for towing 42-50ft 25k+ boats. This is the first product to withstand the requirments. The pintle is so simple and keeps the shop truck from having to swap a standard ball and P-hook between different trailer applications. Highly recommend for the serious user. Its HEAVY so handling the product is a chore but reliability is definatly there. if you buy locking pin for hitch, buy the strongest you can find. We damaged one with this product.



by:

Great hitch works flawlessly. Easy to configure any ball height
Or size. negative is the grey paint and decals flaked off and it is rusting in first 6 months.



by:

This hitch has been used with both balls in every height position. Hitch is durable and high quality. It has not been off my truck since I purchased it and is used frequently to tow 10-20K trailers.



by:

Everything you want in a hitch in this class.



by:

Great Product I pull a lot of weight pretty much everyday.



by:

This is great. Heavy duty, quality product. will use to tow my toad behind my RV & bike rack for bikes above tow bar



by:

This hitch is the last one I should ever have to buy. It is well worth the money and should last a long time. I pull 10,000lb trailers and it works out well. No rattling or clanking with this hitch.



by:

This is the best receiver on the market. It will haul it!!!!



by:

Awesome heavy duty hitch, ordered some locking pins for just incase someone felt strong enough to to take it.



by:

By far the most heavy duty hitch I have ever purchased. Could tell whwn I picked up the box it was well built! Just got it on when I got home from work and haven't used it yet, but it will definitely get tested tomorrow. I will post pics later. If you are on the fence, get it. I don't think you'll be disappointed.



by:

I have both ball and pintle hitch Trailers. That is why I bought this hitch. The hitch it self is well built but the Paint job is not that great . I have had it a year and most of the paint on the Shank ( another reason I bought it for the 3" shank to fit my receiver on my ford Superduty) is pretty much gone. The hitch it self still clanks around in the receiver .I wish there was an adaptor to fit over the Larger ball so that my pintle eye would not move around so much.



by:

Great hitch and awesome quality.



by:

Prompt delivery!



by:

Sturdy, well built. But it rusts!! All that money and it rusted within months. I’ve had a B&W for 10+ years and it’s as shiny as the first day.



by:

Great product. Always the best. This is the 3rd one we have purchased for our heavy trucks. My hitch came all scratched and banged up from poor shipping. Not a positive for a $xxx hitch. Will be looking for a different distributer than etrailer in the future for these products. Great product, 5/5, however etrailer did no favors on this product.



by:

Been towing with this hitch for a year now. It’s the best hitch I’ve ever owned. The longest I’ve ever kept the same hitch. Easy to switch heights, strength, it’s bulletproof. I’ve dropped a loaded dump trailer onto the ball after not getting it lined up correctly. The weight would have bent any other hitch. This Gen-Y laughed at it.



by:

Packaging could be better. Brand new expensive hitch and because it’s packaged poorly there are dings and scrapes and missing coatings on the flats where it’s been banged around. There again this is a bad ass hitch and extremely sturdy and well built. This is a tool and meant to work so the dings aren’t a big deal really if you’re going to use it as such but if you’re wanting show truck sparkle this didn’t suffice. I know these spots where the hitch has been dinged will rust.



by:

You guys do very good job



by:

Haven't used it yet but it looks great! 19 f250 with 8" lift and 37's. The 12 drop is perfect



by:

We use these for almost every truck in our fleet. For us, it really is a 1 hitch solution. On some of ours that our several years old and stay in the receiver year-round, the finish is starting to come off because of the ridiculous amount of salt that they put on the roads in our region. But otherwise they still function 100%.



by:

Nice hitch need a set of locking pins please send me what’s available



by:

Simpliflies the work of switching between ball sizes. And will minimize damage from others if struck in the rear.


25
108
Show More Reviews

See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Michael B
Updated by:
Michael B
Employee Andy C
Installed by:
Andy C
Employee Ryan F
Written by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924