New Arrivals
Dexter/UFP CD-200 Coupler - 2-5/16" Ball - Drop - 3" Channel - Weld On - 20K
In Stock
Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Weld-On
- 20000 lbs GTW
- 3 Inch Channel
- Standard Grade
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K Axle - 8 on 6-1/2 - 9/16 Studs - Oil
A worn or damaged hub can put your trailer and your trip at risk. This ABS-ready replacement is built for Dexters Tow Assist, so you can get back on the road with the reliable braking and steady control you count on.
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- ABS
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 17 Inch Wheel
- Dexter Axle
Dexter Disc Brake Kit - 10" Zinc Rotor - 5 on 4-1/2 - 3.5K Ranger - Fits 1-3/8" Spindle
Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 15 Inch Wheel
- 14-1/2 Inch Wheel
- 14 Inch Wheel
- 13 Inch Wheel
- Dexter
Dexter Bearing Kit for 7.2K - 8K Axles - Inner and Outer Bearings 02475/25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- 2.25 Inch I.D.
- Bearing 02675 and 25580
- Race 25520 and 02420
- 8000 lbs Axle
- 7200 lbs Axle
- Dexter
Dexter Grease Cap with 2.72" OD - Fits 12" x 2" 8-Bolt Hubs - Zinc-Plated - Qty 2
In Stock
Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.72 Inch O.D.
- 6000 lbs Axle
- 5200 lbs Axle
- 7000 lbs Axle
- Dexter
Dexter U-Bolt Plate for 2-3/8" Round Axle - 2" Wide Springs - 9/16" Bolts
Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.
- Trailer Suspension Parts
- U-Bolt Plates
- Snowmobile Trailer
- Boat Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- Dexter
Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 7K Axle - 8 on 6-1/2 - 5/8 Studs - Oil
A worn or damaged hub can put your trailer and your trip at risk. This ABS-ready replacement is built for Dexters Tow Assist, so you can get back on the road with the reliable braking and steady control you count on.
- Trailer Hubs and Drums
- Hub with Drum
- ABS
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 17 Inch Wheel
- 16-1/2 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter Axle
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left/Right - 10K - Dual Servo
In Stock
Get smooth, reliable braking with this Dexter hydraulic drum brake kit. Designed for 9K-10K axles, these self-adjusting brakes reduce maintenance while delivering strong stopping power. Assemblies include parking brake levers for extra control.
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 15 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
Dexter Bearing Kit for 1" BT8 Spindle
In Stock
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- 1.23 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- Dexter
Dexter Channel-Mount Coupler w/ Low-Profile Latch - 2" Ball - 7.7K
In Stock
Already have a Dexter adjustable-channel actuator? Change or replace your coupler with this low-profile latch. It features an over-center latch mechanism that only engages when the coupler is fully seated on your hitch ball.
- Adjustable Trailer Coupler
- Coupler Only
- 3 Inch Channel
- 7700 lbs GTW
- 2 Inch Ball Coupler
- Zinc Finish
- Dexter
Dexter 16.5K In-Line Disc Brake Actuator w/ 2-5/16" Coupler - Bolt-On
When you're towing serious weight, you need more than hope and a prayer. This actuator delivers real braking power and the control to match. Your trailer stays steady, and your hands can steer clear of the white-knuckle death grip.
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Utility Trailer
- Travel Trailer
- Bolt-On
- 16500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- Dexter
Dexter Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - E-Z Lube
A worn or damaged hub can put your trailer and your trip at risk. This ABS-ready replacement is built for Dexters Tow Assist, so you can get back on the road with the reliable braking and steady control you count on.
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- ABS
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 8 on 6-1/2 Inch
- 17-1/2 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- Dexter Axle
Dexter Double-Eye Leaf Spring - 26" Long - 1,875 lb Capacity
This double-eye leaf spring delivers up to 1,875 lb of support per spring to help keep your trailer level and stable, whether youre upgrading or replacing a worn component.
- Trailer Suspension Parts
- Trailer Leaf Springs
- Double Eye Springs
- 1875 lbs
- 1-3/4 Inch Wide
- 26 Inch Long
- Standard Grade
- Dexter
EZ Lube Grease Caps with 2.72" OD - Fits 12" x 2" Dexter 8-Bolt Hubs - Zinc - Qty
In Stock
These 2.72" OD EZ Lube grease caps seal your Dexter hub and let you add grease through the spindle. Zinc-plated steel resists rust. Designed for 12" x 2" Dexter hubs with 8-bolt pattern. Includes 2 caps with rubber plugs.
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 2.72 Inch O.D.
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Dexter
Dexter Single Hydraulic Jack System w/ Double Acting Pump - 7,000 lbs
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.
- Trailer Jack
- 5th Wheel Trailer
- Dump Trailer
- Gooseneck Trailer
- Enclosed Trailer
- Side-Mount Jacks
- 10001 lbs or More
- Hydraulic Jack
- Bolt-On
- With Rectangle Foot
- Dexter
Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy Axles
In Stock
The Vault by Dexter is a maintenance-free bearing system. As bearing temperatures rise during towing, the hybrid oil thins out to replenish bearings with lubricant and dissipate heat. Pressurized, sealed chamber means nothing gets in or out.
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2500 lbs Axle
- 3200 lbs Axle
- 3500 lbs Axle
- Dexter
Dexter Trailer Hub-and-Drum Assembly - 4.4K Axles - 6 on 5-1/2 - 10" Drum
You've got your bearings packed and your tools ready. This bare hub-and-drum drops into place fast, so you can finish the job, clean up, and get back on the road before the sun dips behind the tree line.
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L68149
- Standard Grade
- For 4400 lbs Axles
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
In Stock
Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).
- Trailer Suspension Parts
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
In Stock
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.
- Trailer Jack
- 5th Wheel Trailer
- Gooseneck Trailer
- Enclosed Trailer
- Car Hauler
- Side-Mount Jacks
- Standard Grade
- 10001 lbs or More
- Manual Jack
- Weld-On
- With Rectangle Foot
- RAM
etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories- 2" Hitches
In Stock
If you have any gear with a 2" D-shaped hitch pin receiver this handy hitch lock will secure it to the back of your ride and eliminate noisy rattle. Can be keyed alike to match other locks.
- Hitch Anti-Rattle
- Anti-Rattle Hitch Lock
- Universal
- Keyed Alike
- Fits 2 Inch Hitch
- Accessory Anti-Rattle
- etrailer
Redarc Trailer Power Kit w/ Battery Charger and Monitor - 12V
In Stock
Stay off-grid longer. Charge your trailer battery as you drive, check power from your phone, and keep your gear running so you can settle in, relax, and enjoy your favorite camping spot without worrying about power.
- Battery Charger
- Battery Charger
- Trailer
- RV/Camper
- 500 Ah
- Charges/Maintains
- DC to DC
- Solar Panels to Auxiliary Battery
- Vehicle Battery to Auxiliary Battery
- Redarc
Redarc Alpha 50A In-Vehicle BCDC Battery Charger with Solar Control - DC to DC - 9 to 32V - 50 Amp
In Stock
Mount this slim battery charger almost anywhere! With heat-dispersing fins, smart charging, Bluetooth via the RedVision App, and easy setup, its perfect for lithium batteries and tough enough for the Outback - or wherever your adventure takes you.
- Battery Charger
- Battery Charger
- Car/Truck/SUV
- Charges/Maintains
- DC to DC
- Vehicle Battery to Auxiliary Battery
- Solar Panels to Auxiliary Battery
- Smart Charge
- Redarc
MORryde RV Griddle Drop Down Tray - 21-3/4" x 25" - 100 Percent Extension
In Stock
Slide this griddle tray down and out of your RV cargo compartment so you can cook up some burgers on the fly. It's perfect if you have a taller RV or if you have any mobility issues, as you won't have to haul your 225-lb griddle to a table.
- RV Cargo Slides
- Griddles
- Metal Floor
- 100 Percent Extension
- 25 Inch Wide
- 21-3/4 Inch Long
- 225 lbs
- MORryde
Mad-Ramps Pivoting Ramp System for Golf Carts - 2,000 lbs - 2-1/2" Hitches
Drive your golf cart up into the bed of your truck so you can get where you're going. Then drive it back down and get on with the good times. These ramps pivot automatically into the position you need to load or unload.
- ATV Ramps
- Truck Ramps
- Ramp Set
- Pivot
- 2000 lbs
- Flat
- Mad-Ramps