New Arrivals

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Disc Brakes
• Hydraulic Drum Brakes
• 4 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Need a tough, reliable connection from your caliper to the main brake lines? The non-stick polymer core locks in pressure, while braided stainless steel fends off road debris. No ballooning, no leaks, just reliable stopping power.

• Accessories and Parts
• Trailer Brakes
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• 4-1/2 Feet Long
• Brake Lines
• Brake Line Components
• DeeMaxx

Replaces 1 footplate on your etrailer or Ram fifth-wheel landing gear (RVLG-8000).

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Jack Foot
• etrailer

Replacement clip works with the load-bearing pin for your etrailer or Ram gooseneck trailer coupler. Works with GCPN-PIN.

• Accessories and Parts
• Gooseneck Coupler
• Pins and Clips
• etrailer

14-1/2" x 17". Tired of the rain damaging your electric tongue jack? Slip this weatherproof cover over your jack and secure it with a simple drawstring to keep the elements at bay. Fits most brands and styles of electric A-frame jacks.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Covers
• etrailer

Coming soon! Already have a cargo carrier? Turn it into an enclosed hauler with this lockable cage add-on. Front-load your gear, skip the straps, and keep it covered, so the next pit stop isn't a gamble, and your road trip stays focused on fun.

• Accessories and Parts
• RV Cargo Carrier
• Flat Carrier Parts
• Cargo Cage
• etrailer

Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.

• Accessories and Parts
• Trailer Jack
• Legs
• etrailer

Designed to work with your etrailer scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. Works with 3/8" drill bits.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Tools
• Socket
• etrailer

EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Tire Mounting Compound
• Counteract

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your driver's seat.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 10".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

For heavy-duty applications that require cable, this steel winch cable has a break strength of 4,200 lbs and a working load limit of 1,400 lbs.

• Accessories and Parts
• Electric Winch
• Trailer Winch
• Cables and Straps
• 3/16 Inch Diameter
• 4200 lbs
• Wire Rope
• CURT

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Heat-treated, raw steel collar increases the height of your gooseneck ball on flat plate applications. 2" Tall collar works with B&W smooth shank ball HB94011 (sold separately). Weld-on installation.

• Accessories and Parts
• Trailer Hitch Ball
• Collar
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Pair this center section with a custom mounting kit (sold separately) to get a sturdy hitch for towing your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get total bed access.

• Accessories and Parts
• Gooseneck Hitch
• Hitch Only
• 30000 lbs GTW
• Turnover Ball Gooseneck
• B and W

Heat-treated, raw steel collar increases the height of your gooseneck ball on flat plate applications. 3" Tall collar works with B&W smooth shank ball HB94011 (sold separately). Weld-on installation.

• Accessories and Parts
• Trailer Hitch Ball
• Collar
• B and W

This hitch head has a 4" extended drop to ensure a level, stable tow for your lifted truck or low-riding trailer. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W

Keep the ball platform on your Tow & Stow - or the head on your Continuum hitch - secure on the shank with this sturdy, new lock. Because it's B&W, we're sure the lock will not only be well-made, but awesome looking on your hitch too!

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Weight Distribution Hitch
• Locks
• Locking Pin
• B and W

COMING SOON! Lock down all the adjustment pins on your Tow & Stow so no one can take your hitch apart to try and steal your trailer. We saw this lock on display at the SEMA show, and it looks super-sleek - just like it's built into the hitch.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Locks
• Locking Pin
• B and W

This hitch head assembly gives you 4" of extended shank to give you extra clearance for your tailgate, spare tire, and trailer accessories for easier hookup. Replaces the hitch head for your B&W Continuum weight distribution system.

• Accessories and Parts
• Weight Distribution Hitch
• Head
• Trunnion Bar
• B and W