New Arrivals

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Reese 5th Airborne pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• 5th Airborne Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Fabex Pin Box
• Pullrite

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

This adapter attaches to the factory, underbed fifth wheel towing prep package receivers in your vehicle. The base provides the attachment point for your 5th-wheel hitch with industry standard tabbed feet. Modular design allows for easy removal.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Custom
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Take control of every turn with the PullRite SuperGlide Capture Plate! Built for 12-1/2" MOR/ryde pin boxes, it locks in a secure hitch connection, smooth auto sliding & stress-free towing. Durable, easy to install & ready for the long haul.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Lippert 1621 pin boxes with skid plates that are 12-3/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Camping's already an adventure - don't add scratched paint to the mix. These strap protectors for your Napier truck bed tent have your back - and your truck's! Just slide them over the tent straps to stop scratches before they happen.

• Accessories and Parts
• Tents
• Truck Bed Tents
• Straps
• Napier

Love your Napier Sportz SUV tent with the screen room, but wish the screened-in part was a little cleaner? This custom wall-to-wall floor helps prevent dirt and ground moisture from seeping in, so your gear stays clean and dry.

• Accessories and Parts
• Truck Bed Tents
• Tents
• Floor
• Napier

Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 23-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Replaces the #06 rubber shear spring on MORryde's rubber pin boxes for trailers over 18,000 lbs GVWR. Helps absorb and dampen road shock, vibration, and reduces chucking. Installs on the skid pad with your existing hardware.

• Accessories and Parts
• 5th Wheel Pin Box
• Shear Springs
• MORryde

Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load gear. We even included a lock for security.

• Accessories and Parts
• Roof Box
• Watersport Carriers
• Ski and Snowboard Racks
• Roof Bike Racks
• Roof Rack
• Load Assists
• MOS Racks

Transform your Mad-Ramps setup into a loading system for your snowmobile. As long as your skis are 34" - 42" apart, you can use this kit - along with your Mad-Ramps - to easily and safely get your snowmobile in and out of your truck bed.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Snowmobile Kit
• Mad-Ramps

Designed for motorhomes, this telescoping rail replaces the small grab handle by your door. The 3' rail gives you extra stability on your steps. Folds flat against the wall with a sleek, low-profile look that won't obstruct the door.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• MORryde

Replaces a MORryde rubber shear spring embossed with "16". Works with MORryde LRE, RS, or SRS suspension systems.

• Accessories and Parts
• Trailer Suspension Parts
• Springs
• MORryde

Replaces the treat cover for the deep, top-step on your Gen 2 StepAbove RV steps with 19-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Love outdoor adventures but struggle with lifting gear onto your crossbars? We recommend the MOS UpLift. Gas-strut-powered arms drop down to just over shoulder level, making it easier than ever to load kayaks, bike racks, cargo boxes, and more.

• Accessories and Parts
• Ski and Snowboard Racks
• Roof Box
• Roof Bike Racks
• Roof Rack
• Watersport Carriers
• Load Assists
• MOS Racks

Keep your extension cords stored neatly on the wall of your RV basement or garage. Bracket mounts to wall, giving you a dedicated place to store the cord keeper. Compact design fits standard 125V extension cords up to 50' long.

• Accessories and Parts
• Extension Cords
• Cord Keeper
• MORryde

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 4-step with 23-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Attach these risers to the ramps on your Mad-Ramps setup to get the lift needed for loading low-riding gear like golf carts. Recommended for golf carts with 10" or 11" wheels.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Golf Cart Risers
• Mad-Ramps