New Arrivals

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Rota-Flex pin boxes with skid plates that are 13-5/8" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits Lippert 1621, 1116, and 1716 pin boxes with 13-1/4" wide skid plates.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Reese 5th Airborne pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• 5th Airborne Pin Box
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Fabex pin boxes with skid plates that are 12" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Fabex Pin Box
• Pullrite

Tow your trailer with confidence using this PullRite capture plate, designed for Lippert Helux pin boxes. It locks the king pin to ensure smooth tracking with SuperGlide hitches, preventing unwanted rotation and enhancing towing safety.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Pullrite

Replaces the base for your PullRite ISRX Super or SuperLite 5th-wheel hitch for industry-standard rails. Rated for 24,000 lbs gross towing weight.

• Accessories and Parts
• 5th Wheel Hitch
• Base
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required to tow with the SuperGlide. This plate fits cushioned MORryde pin boxes with skid plates that are 13-1/2" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• MORryde Pin Box
• Pullrite

Bolt this capture plate onto your Lippert 0719 pin box to prevent the king pin from rotating inside your PullRite fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Pin Box
• Pullrite

Install this wedge on your Lippert Turning Point, Sidewinder, or MORryde Orbital 5th wheel pin box to prevent the king pin from rotating in your Pullrite Super 5th wheel hitch.

• Accessories and Parts
• 5th Wheel Pin Box
• Wedges
• Lippert Turning Point
• Pullrite

Protect the finish on your hitch and truck bed with these lube plates. Designed for the #2600 SuperLite 20K and #3900 Super 5th 24K hitches, these durable nylon plates reduce friction and eliminate the need for messy lubricants.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Lube Plate
• Pullrite

Use this plate to keep your trailer's king pin from rotating in your PullRite SuperGlide hitch. A capture plate is required for you to tow with the SuperGlide. This plate fits Flex Air pin boxes with skid plates that are 13-1/4" wide.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Trailair Pin Box
• Pullrite

Mount your Traditional Series PullRite SuperGlide hitch to industry standard base rails or gooseneck mounts using this adapter kit. Works with 4100, 4400, and discontinued 3300 models. Base rails sold separately.

• Accessories and Parts
• 5th Wheel Hitch Rails
• Adapters
• Rail Adapter
• Pullrite

This kit is designed to eliminate interference of the axle breather and the Pacbrake air spring support bracket on Dodge 3500 Cab&Chassis vehicles.

• Accessories and Parts
• Vehicle Suspension
• Axle Breather
• Relocation Kit
• Pacbrake

Need a replacement tank for your Pacbrake setup? This 1/2-gallon carbon steel tank is powder coated, corrosion-resistant, and built to ASME specs—ready to store air for your suspension or accessories.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• On Board Air Compressor
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one large double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

Universal mounting bracket for use with HP625 Series compressors.

• Accessories and Parts
• Vehicle Suspension
• On Board Air Compressor
• Air Bag Compressor Kit
• Tire Inflator
• Mounting Hardware
• Brackets
• Pacbrake

Need to reposition the rear height sensor on your air suspension setup? These passenger side relocation brackets are designed for use with HP10402 air spring kits and make sure everything stays aligned and working as it should.

• Accessories and Parts
• Vehicle Suspension
• Mounting Hardware
• Brackets
• Pacbrake

Looking for simple, in-cab control of your air springs? This basic paddle valve kit connects to your existing air system and lets you inflate or deflate each spring independently with dual switches and a built-in mechanical gauge.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Air Compressor System
• 150 psi
• Wired Control
• Dual Path
• Pacbrake

Waiting on your compressor to catch up? Add this 1/2 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD Pro air suspension kit. Includes one single convoluted air bag with internal jounces and aluminum end caps

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

Replaces the HP325 Series air compressor for you Pacbrake onboard air system or air suspension system. This 12V unit has a chrome finish and comes with installation hardware.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Tire Inflator
• Air Compressor
• Pacbrake

This pressure switch is rated for 105 - 135 psi and is required when adding an air tank any of Pacbrake's Paddle Valve In-Cab Control Kits. A pressure switch rated for 85 - 105 psi (HP10111) is sold seperately.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Switches
• Pacbrake

Replaces the HP425 Series air compressor for you Pacbrake onboard air system or air suspension system. This 12V unit has a chrome finish and comes with installation hardware.

• Accessories and Parts
• Vehicle Suspension
• Tire Inflator
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Compressor
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake