You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.
You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.
Your CS Free is built for portability, but when you're home, you need a safe spot for it. This mount keeps your charger secure in your garage. Mount it permanently or hang it temporarily - either way, your charger is ready when you need it.
Your charger is an essential tool, but where do you put it when you're working? This wall mount keeps your charger secure and within reach, whether mounted to a wall or hung on a vehicle door. It's just a smarter way to store your charger.
Your battery is out of sight, and now it's out of power. The indicator pigtail converts your SAE quick connector into a real-time battery monitor, so you always know when it's time to charge. The LEDs let you check your battery at a glance.
You're on the road, miles from an outlet, and your CS Free charger is running low. The 12V plug lets you recharge directly from your vehicle's 12V socket, so your charger is always ready when you need it. Just plug in and power up - anywhere.
Your battery doesn't give warnings until it's too late. This indicator plug gives you an instant read on your battery's health through your 12V socket, so you always know when it's time to charge. No tools, no hassle.
Your charger keeps your battery ready, but where do you keep your charger? The mounting bracket gives your charger a dedicated home, keeping it secure, off the floor, and always within reach. No more tangled cables or misplaced chargers.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
In a busy workshop, efficiency is key. The Trolley Pro keeps your chargers, laptops, and testing equipment organized and mobile, so you can move seamlessly between tasks without missing a beat. Make sure your essential tools are always within reach.
You invested in the CS Free to keep you powered up - now protect it. This case keeps your charger safe and organized. With a water-resistant design and padded interior, it ensures your charger and accessories stay secure wherever the road takes you.
Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.
This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.
Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.
Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.
This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.
Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.
Replaces the exterior door for your Fogatti tankless water heater. Hinged door with flat lock provides easy access for cleaning or maintenance. Sized to cover large opening when replacing a tank water heater.
This replaces your old Fogatti tankless hot water heater and works great if you generally don't camp in colder months and don't use a lot of hot water all at once. The propane burner can heat 2.5 gallons of water per minute.
Replaces the exterior door for your Fogatti tankless water heater. Hinged door with flat lock provides easy access for cleaning or maintenance. Sized to cover large opening when replacing a tank water heater.