New Arrivals

Replaces the sealing gasket for your Diode Dynamics C1 LED light pod.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Gasket
• Diode Dynamics

Replaces the wear plate on your 18,000-lb or 21,000-lb Demco Auto-slide fifth-wheel hitch.

• Accessories and Parts
• 5th Wheel Hitch
• Plates
• Wear Plates
• Demco

Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.

• Accessories and Parts
• 5th Wheel Pin Box
• Locking Plate
• Lippert Helux
• Demco

Secure your stainless steel brake lines with this silicone-lined clamp. The yellow silicone cushion prevents damage from vibration, while the stainless steel construction resists rust and corrosion. Fits 1/4" braided stainless steel brake lines.

• Accessories and Parts
• Brake Actuator
• Trailer Brakes
• Hydraulic Drum Brakes
• Disc Brakes
• Brake Lines
• Brake Line Components
• DeeMaxx

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Replaces (1) 3-1/2" x 5/8"-18 Dexter Axle press-in wheel stud for 8K to 12K disc brakes or idler hubs with 5/8" studs.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Hubs and Drums
• Trailer Tires and Wheels
• Wheel Studs
• 5/8 Inch Diameter
• Drive-In Stud
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace or add a reverse lockout solenoid to your surge brake actuator from Dexter or Tie Down Engineering to keep the actuator from activating your trailer brakes when you shift into reverse.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Hydraulic Drum Brakes
• Solenoid
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Replace a worn or leaking copper washer on your Dexter disc brake caliper. This 7/16" crush washer provides a tight, reliable seal between the banjo fitting and caliper to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Hardware
• Caliper Parts
• Washers
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• RH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces 1 caliper retaining shoulder bolt on your Dexter 10K and 12K hydraulic disc brake caliper.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• 6000 lbs
• 8000 lbs
• 7000 lbs
• Caliper Parts
• Hardware
• Bolts
• Dexter

Replacement zerk for trailer hubs with Dexter Axle EZ Lube spindles

• Accessories and Parts
• Trailer Spindles
• Grease Zerk
• Dexter Axle

This replacement inner member slide easily fits into the existing housing of your Dexter XR84 or Legacy UFP surge brake actuator. For use with single or tandem-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.

• Accessories and Parts
• Trailer Spindles
• Trailer Axles
• Trailer Suspension Parts
• Spindle Retainer Kit
• Dexter

The sun is blazing, but your battery isn't. This solar panel lets you harness the sun to recharge your CS Free, keeping your battery and devices powered so you're never stranded off-grid. Just unfold the panel, position it, and power up.

• Accessories and Parts
• Battery Charger
• Solar Kit
• CTEK Power Inc

You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.

• Accessories and Parts
• Battery Charger
• Cases
• CTEK Power Inc

You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.

• Accessories and Parts
• Battery Charger
• Cables
• Extension Cable
• CTEK Power Inc

You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.

• Accessories and Parts
• Portable Chargers
• Battery Charger
• Clamps
• CTEK Power Inc