New Parts Accessories Product Arrivals

Weight distribution hitches are heavy, awkward, and usually a little greasy. Instead of cramming yours into a storage bay or losing it in the garage, this removable bracket mounts to a trailer's A-frame to keep your gear secure between trips.

• Accessories and Parts
• Weight Distribution Hitch
• Covers and Storage
• Brackets
• MORryde

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 3-step with 19-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Replaces the mounting hinge pin for your MORryde Step Above RV Entry 2 steps (STP-202-MH-226-09). Pairs with hinge plates (MR66RV - sold separately) to install your steps in the doorway of your RV.

• Accessories and Parts
• RV Steps
• Hardware
• Pins
• MORryde

Turn your Mad-Ramps pivoting system into a set of standard loading ramps so you can get your equipment up and into your truck bed. Just snap these onto the tops of your ramps to keep them from pivoting while you load.

• Accessories and Parts
• Truck Ramps
• ATV Ramps
• Pivot Stops
• Mad-Ramps

Easily and efficiently store your Mad-Ramps system (MR2000) with this solution that keeps your equipment up off your garage floor. Just bolt the Mad-Mount to the wall of your shop or garage, and get simple storage for each piece of your system.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Storage
• Mad-Ramps

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 4-step with 19-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Pop these durable polycarbonate spacers onto the pivot bar of your Mad-Ramps setup (MR93ZV) to keep the ramps from shifting side to side.

• Accessories and Parts
• ATV Ramps
• Truck Ramps
• Spacers
• Mad-Ramps

Get some added traction with these slip-resistant and marine-grade step treads. These step treads are designed specifically for the MORryde Gen II StepAbove 3-step with 23-1/2" treads. Applies quickly and easily with adhesive backing.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Replaces the tread cover for the standard, lower-step on your Gen 2 StepAbove RV steps with 19-1/2" wide treads.

• Accessories and Parts
• RV Steps
• Grip Tape
• MORryde

Got a MOS UpLift lift assist on your crossbars but afraid someone might swipe it while you're getting a bite to eat? No worries. The MOS lock secures the lift assist to your crossbars, so you can be more concerned with the menu than your gear.

• Accessories and Parts
• Watersport Carriers
• Roof Box
• Roof Bike Racks
• Ski and Snowboard Racks
• Roof Rack
• Load Assists
• Locks
• MOS Racks

Camping's already an adventure - don't add scratched paint to the mix. These strap protectors for your Napier truck bed tent have your back - and your truck's! Just slide them over the tent straps to stop scratches before they happen.

• Accessories and Parts
• Tents
• Truck Bed Tents
• Straps
• Napier

Love your Napier Sportz SUV tent with the screen room, but wish the screened-in part was a little cleaner? This custom wall-to-wall floor helps prevent dirt and ground moisture from seeping in, so your gear stays clean and dry.

• Accessories and Parts
• Truck Bed Tents
• Tents
• Floor
• Napier

Got a Napier truck bed tent but need more space for your camping crew? This ground attachment is the upgrade you didn't know you needed. It turns your 2-person truck tent into a bi-level, 4-person camping mansion. Twice the space, twice the fun!

• Accessories and Parts
• Truck Bed Tents
• Tents
• Annex
• Blue
• Napier

Mount a 3/4" round trailer light with this flush bracket. Compatible with dozens of Optronics LED models. Black plastic housing resists corrosion. Surface mount design installs easily. Light and mounting hardware sold separately.

• Accessories and Parts
• Trailer Lights
• Mounting Hardware
• Grommet
• Diamond
• Optronics

This kit is designed to eliminate interference of the axle breather and the Pacbrake air spring support bracket on 2019 and newer Ram 3500 Cab&Chassis vehicles.

• Accessories and Parts
• Vehicle Suspension
• Axle Breather
• Relocation Kit
• Pacbrake

Need a replacement tank for your Pacbrake setup? This 1/2-gallon carbon steel tank is powder coated, corrosion-resistant, and built to ASME specs—ready to store air for your suspension or accessories.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• On Board Air Compressor
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one large double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

Universal mounting bracket for use with HP625 Series compressors.

• Accessories and Parts
• Vehicle Suspension
• On Board Air Compressor
• Air Bag Compressor Kit
• Tire Inflator
• Mounting Hardware
• Brackets
• Pacbrake

Need to reposition the rear height sensor on your air suspension setup? These passenger side relocation brackets are designed for use with HP10402 air spring kits and make sure everything stays aligned and working as it should.

• Accessories and Parts
• Vehicle Suspension
• Mounting Hardware
• Brackets
• Pacbrake

Waiting on your compressor to catch up? Add this 1/2 gallon tank to store air and speed up your system. You'll get quicker response from your air springs or tools, plus fewer compressor cycles and smoother control when it counts.

• Accessories and Parts
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• On Board Air Compressor
• Air Tank
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD Pro air suspension kit. Includes one single convoluted air bag with internal jounces and aluminum end caps

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake

This pressure switch is rated for 105 - 135 psi and is required when adding an air tank any of Pacbrake's Paddle Valve In-Cab Control Kits. A pressure switch rated for 85 - 105 psi (HP10111) is sold seperately.

• Accessories and Parts
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Switches
• Pacbrake

Replaces the HP425 Series air compressor for you Pacbrake onboard air system or air suspension system. This 12V unit has a chrome finish and comes with installation hardware.

• Accessories and Parts
• Tire Inflator
• Air Bag Compressor Kit
• Vehicle Suspension
• On Board Air Compressor
• Air Compressor
• Pacbrake

Replaces one air bag for your Pacbrake Alpha HD air suspension kit. Includes one double convoluted air bag with aluminum end caps.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Alpha HD
• Pacbrake