Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8219ELT,31374
Retail:$2,829.90
Our Price: $2,449.25
You Save: $380.65
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 82" wide x 19" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 265 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8219ELT Detail K2 Elite Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31374
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31374 Curt Front-Mount Trailer Hitch Receiver
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219ELT
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31374
Average Customer Rating: 4.8 out of 5 stars (67 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Wayne03/23/2018
2014 Ram 1500
If I could mark it at 4.5 stars I would. I like it the hitch.
I think it hangs down too low, only 8" off the pavement. I did not like to have to take off the tow hooks to install the hitch. I did like the idea of I sold the tow hooks for almost as much as I paid for the hitch.
I had to buy a hitch extender. ( I do not see the extender I bought on etrailer listed any more.) The extender put the hitch out far enough to clear the grill guard that I had installed. My goal was to have a place to mount my 8,000 pound winch. I can now slide the winch in the front receiver or the back factory receiver. I can now pull the truck out from either front or back.
by: Danny08/22/2019
This front mount hitch was just what we needed to haul our bikes when camping with the slide in camper. We had to take the bikes and a bike hitch off each time we had to get in the camper when we stopped. This front mount hitch saved us from having to do that. Also use it for a carrier to carry extra luggage. It came fast and it was very easy to install, just as advertised.
by: Carlos02/20/2021
This thing is fantastic! My girlfriend and I put this thing together. It is perfect for keeping up with a storm. It is sturdy, takes a beating and keeps on going. I have a 2014 Ram ecodiesel. Would not use this plow setup for professional jobs however, only because it isn’t heavy enough to plow through mounds of snow covered ice. And when I say mounds, I mean 2 feet high and dense. Only drawback was shipping: I never received a tracking number from the shipping company but it did ship right away and was delivered in the time frame I was given. Enjoy guys!
by: Paul06/18/2020
Front Hitch for 2014 Ram 1500
Using for surf fishing rod holder
Exact fit, Easy well explains instruction and etrailer web site video helpful too.
Took 30-45 mins including drilling holes needed for this install. Very Happy!!
Thank you.
by: Jason11/21/2017
Installation was easy and the product is an excellent looking addition to my truck
by: Bill06/30/2017
Easy install, great fit, excellent instructions and fast shipping.
Bill
6/30/2018
Ive used this several times and it works great. It is a little low, but I use a Curt Hitch Haul with a angled shank.
by: Paul10/18/2017
This worked out pretty well- drove it for the first time since installed it and it definitely has an affect on how the vehicle feels (I guess the added weight to the front end ) I wouldn't say bad but different. The hitch went on easy, had to trim a very small bit of the air dam maybe a quarter inch. I was worried it would have a impact on the aesthetics of the truck but I think it looks pretty awesome - also the price was the best I could find on the net
by: Deb04/22/2019
Good North American made hitch. Clearance from tow hoops to ground a consideration. Bent one hoop back but only because the old logging road was that bad.
by: James 03/23/2024
Fast delivery, easy installation, fair price
by: Edward 04/20/2024
Works as designed!
by: Robert 11/10/2023
Quality product with clear installation instructions
by: Steven 04/17/2021
I am very happy with my Curt front mount trailer hitch receiver which I use for my rod and cooler holder for surf fishing. It is well constructed and assures me of many years of use. I would recommend Curt to anyone who would like a well built front hitch.
Steven
4/18/2022
Works great for my surf rod rack on my 2012 Ram pickup.
by: Scott 09/18/2022
I live in the city. So our yards are really not designed to put a travel trailer in. I am using this front mounted hitch to swing my Trailmanor 3124KS our the back yard. Much cheaper option than a powered trailer jockey. Plus I can mount bike carrier, winch etc to the front with no problems.
by: Chuckie11/26/2019
This front receiver hitch is just what I needed for parking my boat in a very narrow location next to my residence---much shorter turning base having the hitch on the front of the vehicle vs the rear.
This product took just over an hour to install and was very easy with a "second" pair of hands.
will do the same on my next truck
Charles
12/24/2020
Used it several times this past year===I have a very small space to park my boat next to my residence-instead of using the rear hitch I use the front-it is much easier using the front hitch. Seasons Greeting and stay safe.
by: Scott 07/23/2023
2019 Ram 1500 Classic
Perfect fit. Fishing wire made the install very easy. Took one person less than 30 minutes to complete.
by: Rick C09/05/2017
Chevrolet Suburban
have had a curt front hitch before(98 Suburban) so was familiar with it.
pretty easy install.
hate loosing the factory tow hooks!!!! need to find a way around that.
Rick C.
9/5/2018
no problem with product as far as manufacturing and quality. have on a 4x4 Ram 1500. hangs too low,drags if u cross the smallest ditch etc. also mounts to far in and when you put carrier into hitch it butts up against bumper and will not go in far enough to put the pin thru. havent been able to use it, just havent had time to take it off.
by: Bennett 09/02/2023
Arrived on time and the hitch fit perfectly. Good quality.
by: Robert09/09/2020
Easy to install. Works great with my home plow. Don't have to back up with trailers around the yard, precision trailering from the front. My only gripe is that if you buy a new truck to install this front mount hitch you will need two bolts unless you can fish out the existing bolts with a magnet. Save the fish wire that comes with the mount.
by: Mark 07/07/2020
Product was an easy install, shipping was fast and customer service is always outstanding!
The hitch is barely noticeable and it didn’t need to cut the fascia.
Mark
7/8/2021
Works as advertised. Very easy to install didnt have to cut any bumper plastic. Holds up to the impact of having a plow connected to it.
by: David 12/27/2023
Fast delivery!
by: Jeff 11/21/2022
2017 Ram 1500
I wanted a front-mounted receiver hitch so I could push my travel trailer into its narrow parking spot. Backing in was challenging - I have a narrow curving driveway with rock walls on both sides.
I had a service garage install it for me - and it works great!
It does sit rather low so I have to lower my trailer's hitch to its lowest point so I can connect it to my truck.
by: Dan 06/22/2022
Fit perfectly and works just like it should. Makes pushing my travel trailer into the barn much easier. The only thing that I would improve is to make it where I could still keep the factory tow hooks..
by: Ron 01/17/2024
2017 Ram 1500
Very fast service
by: Mark03/05/2018
Perfect fit and installs as stated in the instructions. Trimming the valance is very minor, however it does not have to be done. Frame steel is real so don't go cheap on a drill bits.
Marcus
3/5/2019
Working out great. Used for surf fishing basket. Does reduce ground clearance a hard two inches.
by: James 08/04/2021
Works great! You need a good drill bit to drill the holes in your frame, but otherwise no problem.
James
8/5/2022
Product still works great.
25
67
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Best Snow Plow For 1999 Ford Explorer
- I recommend getting the Detail K2 Plow as they are very popular and reliable for many years of use. Both will need this front trailers hitch receiver # C31051. If your 1999 Ford Explorer is 4 wheel drive, you'll need this kit # K2AVAL8219ELT and if you have a 2 wheel drive version you'll need this one # K2AVAL8219. Both function the same.
view full answer... - How is the Blade Lifted/Lowered on the Detail K2 Avalanche Elite Snowplow for a 2002 Jeep TJ
- The Detail K2 Avalanche Elite Snowplow part # K2AVAL8219ELT has a 82" wide x 19" tall which is raised and lower via an electric motor which is attached to a set of chain links. In order to use this on a 2002 Jeep TJ you will need the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - Do I Need to Trim Front Fascia or Drill When Installing Curt Front Hitch on 2010 Dodge Ram 1500 4x4
- I checked the instruction guide for installation of the Curt Front Mount Trailer Hitch Receiver, part # 31374, to your 2010 Dodge Ram 1500 4x4. The guide says that trimming the front fascia is optional but not necessary. The front fascia will flex with part # 31374 installed on your 2010 Dodge Ram 1500 4x4. No, you do not need to trim the front fascia to install the hitch receiver.
Yes, Part # 31374, uses existing empty holes in the frame to mount to but also requires the drilling of
view full answer... - Will Curt Front Hitch 31374 Fit a 2WD Ram 1500
- The Curt Front Mount Trailer Hitch Receiver # 31374 fits an 2009-2018 Ram 1500, a 2019-2021 Ram 1500 excluding the Rebel or a diesel, and 2019-2022 Ram 1500 Classic excluding the Warlock. Curt has it listed as only fitting the 4WD models so I wouldn't try to use it with a 2WD Ram pickup.
If you have a 2WD then you can use the Draw-Tite Front Hitch Receive # 65062 which is listed to fit a 2009-2018 Ram 1500 and then a 2019-2021 Ram 1500 Classic. This fits both the 2WD and 4WD model types.
view full answer... - Does Curt Front Hitch 31374 2021 Ram 1500 Classic
- The Curt Front Hitch # 31374 that you referenced does fit your 2021 Ram 1500 Classic and would require you to remove the tow hooks.
view full answer... - Is Air Dam Trimming Required to Mount Curt Front Receiver on a 2011 Dodge Ram 1500 4x4
- I went out to the warehouse to measure Curt front mount receiver # 31374 for you. From the top of the lower mounting flanges to the top of the receiver measure 4-1/8 inches. So it does sound like you will need to trim a little. Though you might be able to just bend the air dam in that location depending on how much overlap there is.
view full answer... - Will a Front Hitch Help My Ability to Maneuever a Trailer In Tight Spaces
- I haven't ever personally used a front hitch to maneuver a trailer, but I do know that everyone I know that has one, swears by it as the greatest solution for this problem. It will definitely make getting your trailer into a tight space easier, but there are some minor downsides to this solution. The biggest one is not having mirrors to rely on to provide a line of sight on the sides of the trailer, but a lot of people also complain about having to get out of the truck, unhitch, backup,
view full answer... - Front Mounted Hitch Fit for 2016 Ram 1500 2WD
- The Curt hitch # 31374 you mentioned is not a fit for 2WD vehicles. Instead you will want to use the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65062 which is a confirmed fit for your truck. I've linked a video to further assist.
view full answer... - Front Hitch Recommendation for a 2014 Ram 1500 2 Wheel Drive
- For your 2014 Ram 1500 2 wheel drive the correct front mount hitch you would want is the Draw Tite Hitch part # 65062 as it has been confirmed as a fit for your vehicle.
Although it looks similar, the Curt Hitch part # 31374 will only fit the 4 wheel drive models.
view full answer... - Recommended Front Mount Hitch for 2017 Ram 1500
- The Curt Front Mount Trailer Hitch # 31374 referenced in your question is confirmed to fit your 2017 Ram 1500, as long as it is the 4WD model. This custom-fit hitch will allow you to easily attach a variety of accessories to the front of your truck with its 2 inch receiver. It features a 500 pound vertical load limit and a 9,000 pound line pull capacity.
I have attached the installation instructions that you can also take a look at. The complete hardware kit is included.
view full answer... - Front Hitch Recommendation for a 2012 Dodge Ram 1500 4WD
- The OEM tow hooks of your 2012 Dodge Ram 1500 4WD will need to be removed to install the Curt Front Hitch part # 31374 that you referenced. Good news is this hitch comes with tow hooks welded to it, so you won't be without them.
Also, ground clearance will only be reduced by about 1 inch. The fascia will need to be slightly trimmed to accommodate the hitch opening, so realistically it won't hang much lower than the front fascia.
view full answer... - Can I Use a Cargo Carrier With the Curt Front Mount Trailer Hitch Receiver on my 2015 Ram 1500
- The Curt Front Mount Trailer Hitch Receiver # 31374, which is a confirmed fit for your 2015 Ram 1500 as long as it is a 4x4, has a Vertical Load Rating of 500 lbs. As long as that weight capacity is not exceeded then this front mount hitch will be a great solution for you to carry a generator on the front of your Ram.
If you are wanting to use a cargo carrier to haul a variety of cargo, then I recommend going with the 24x60 Curt Cargo Carrier # C18151. This will fit in the 2 inch receiver
view full answer... - Ground Clearance of Front Mounted Receiver Installed on 2009 Ram 1500 2WD
- According to Curt, their # 31374 front mounted receiver isn't recommended for 2WD models because of their lower ride height. My Curt representative also told me that there might be differences in the front suspension members that would interfere with the hitch.
The Draw-Tite # 65062 which is indeed very similar to the Curt model will sit so that the underside of the receiver tube will sit about 1-3/4 inches below the bottom of the bottom of the bumper fascia. In Draw-Tite's opinion,
view full answer... - Do the Front Tow Hooks have to be Removed For Front Trailer Hitch Installation, 2009 Dodge Ram 1500
- To install the CURT Front Mount Receiver, # 31374, the tow hooks will need to be permanently removed. I have included a link to the installation instructions for you to view. Removal of the tow hooks is the first step. Since the hooks will be removed, the bushings you see will also need to be removed so the hitch can be properly installed.
view full answer... - Actual Vertical Load Weight Rating for Curt Front Mount Trailer Hitch Receiver 31374
- I went to our warehouse to confirm the vertical load/tongue weight rating of the Curt Front Mount Trailer Hitch Receiver # 31374. The safety sticker on the hitch indicates as vertical load rating of 500-lbs. This hitch is a confirmed fit on the 4WD 2016 Ram 1500.
view full answer... - Do Tow Hooks of 2014 Ram 1500 Have to Come Off to Install Curt Front Hitch
- The tow hooks of your 2014 Ram 1500 4WD have to be removed to install the Curt trailer hitch part # 31374 as they interfere with where the hitch would need to install. The good news is that this hitch comes with two safety hook loops which can be used if you were to ever have a need for the tow hooks.
view full answer... - Do Front Tow Hooks Need to be Removed to Install Front Mount Trailer Hitch on 2018 Ram 1500
- Yes, the factory tow hooks of your 2018 Ram 1500 will need to be removed when installing the Curt Front Mount Trailer Hitch Receiver # 31374.
view full answer... - Snowplow that Can be Operated from Inside a 2017 Ram 1500 4x4 and that Fits a Front Receiver Hitch
- For your 2017 Ram 1500 4x4 and front hitch # 31374 I recommend the SnowBear Proshovel # SB324-140. This plow comes with a wireless remote and in-cab switch so you can operate the plow from inside the truck. The blade has 5 angle options and a steel cutting edge.
If you will be doing any plowing at night I recommend adding light kit # SB324-127 for the best visibility.
view full answer... - Recommended Front Mount Hitch For A 2017 Ram 1500
- When it comes to installing a front mount hitch on your 2017 Ram 1500 The Curt # 65062 front mount receiver hitch is a great choice for your vehicle. This front mount hitch has an easy, bolt on installation with no welding required. This front mount hitch with a bike rack attached to it will not block the headlights, and it will not interfere with the airflow to the radiator.
The hitch has a line pull of 9,000 pounds and a vertical load of 500 pounds. It has a black powder coat finish
view full answer... - Will a CURT Front Mount Trailer Hitch Fit a 2011 Dodge Ram 1500 4x4 Big Horn Edition
- I spoke with my contact at CURT about the front mount hitch, # C31374. He stated that they have not seen any fit issues with a Big Horn edition of the 2011 Dodge Ram 1500 4x4 so it should fit. I have included a link to the installation instructions for you.
This hitch would be great for a winch. If you need a trailer hitch mount winch mounting plate, you may be able to use the CURT model, # C31010.
view full answer... - How Much Of The Fascia Needs To Be Cut When Installing Curt Front Hitch # 31374 On A 2018 Ram 1500
- When installing the Curt Front Mount Hitch # 31374 on your 2018 Ram 1500, fascia trimming is optional. The fascia will flex with installation of the hitch. I will attach a diagram showing what you should cut off below of the fascia if you decide to go in that direction. The Curt front mount hitch has an easy, bolt-on installation with no welding required. The hitch is manufactured in The USA.
I linked an installation video below of the Curt Front Mount Hitch being installed onto a 2017
view full answer... - Availability of a Front Mount Trailer Hitch for a 2009 Dodge Ram 1500 Pickup
- You are correct the # 31374 is confirmed as a fit for the four wheel drive option of your truck, but I have checked and we do have an option for your 2009 Dodge Ram 1500 two wheel drive. It is the # 65062 manufactured by Draw-Tite.
This hitch has a line pull rating of 9000 pounds and vertical load capacity of 500 pounds. Please note that for installation of this hitch you may not be able to retain your current tow hooks on your truck. Please take a look at the installation instructions
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Jacob T
Test Fit:
Randy B
Test Fit:
David F
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jason
11/24/2018
All the products from this order have held up to the abuse ive put them through. Unfortunately/fortunately last month i acquired a new ram 2500, and will be buying new accessories from etrailer soon! Your customer service is great and prices are even better!!