SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-080,C31012
Retail:$2,818.84
Our Price: $2,530.55
You Save: $288.29
In Stock
Need help with installation?
Locate installers near meSnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31012
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31012 Curt Front-Mount Trailer Hitch Receiver
Compare to Draw-Tite 65052
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31012
Average Customer Rating: 4.7 out of 5 stars (41 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: David03/28/2021
Product is great! Exceeds my expectations for ease of installation and performance. I removed the 3” spoiler completely vs cutting for hitch. The key is to “dry fit” in place and use a metal punch to mark all your drill holes. Wire bolt feeder worked great for installing bolts. I used the hitch to mount my eight pole rod & cooler holder for surf fishing.
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Gary S10/06/2014
Super fast shipping,but could use better packing.Hitch actually made a large hole in box,UPS driver had me check to see if anything was missing.Easy install,but try finding a 17/32" bit. After seeing how big the front opening is I just used a 1/2" bit. I think it took longer to remove, trim and reinstall the front spoiler than the rest of the job. Looks great installed
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: Allan 11/05/2023
2016 Chevrolet Silverado 1500
The hitch was as I expected. Went on with not much trouble The directions say to be careful when positioning the hitch after installing the bolts in the frame not to lose then up in the frame I just used my hot glue gun to hold them in place. Us eighty one year olds have to work smarter
by: Wayne S.08/02/2017
2010 Chevrolet Suburban
Here are some pictures of my new hitch on my 2010 Chevy Suburban. It was received in great shape, instructions were very helpful and install was fairly easy. It was a pleasure doing business with you guys and a big thank you to George J
for his follow ups.
by: Steve Y.07/01/2012
So far so good! Looks and feels like a high quality product, the welding looks great, everything was fabricated square and accurately. The first thing I did was remove the lower black fascia from my truck so it is easier to properly locate the hitch. Once properly located on frame of truck and mounting are holes are marked all you have to do is simply drill four 17/32" holes and fish bolts thru frame. The fish wire that is provided to pull the bolts through the frame was ingenious, someone was really thinking when they designed this. This was truly a breeze to install.
by: Amber 06/11/2023
2016 Chevrolet Silverado 1500
I bought this for my 2016 Chevy 1500. We used a jack to hold the hitch in place to mark the drill spots. It had two holes already there so we drilled out 4 and up it went. Very easy! Within a couple of hours we were taking out e-bikes to the park.
by: Michael 12/30/2023
Works well for the price.
by: Ken11/25/2020
I don't write reviews often
I wanted to share my experience installing C31012
Over the years I've purchased 6 or 7 hitches from etrailer. I had completely different experience this time. I don't recall seeing website comments that drilling was required or the expected install time..
Usually the website is accurate or maybe I just missed theses items.
So the install video for 2014 Sierra doesn't apply for 2017 and maybe later.
The CURT instructions also have the access hole wrong. Its the front hole.
There are no others.
Maybe mentioning a trick to put tape on threads before removing feeder. So easy to lose the bolt with a slip when raising the hitch into place.
What was most difficult was measuring for precisely drilled hole locations with off road skirt blocking frame to frame access.
My solution was to clamp hitch C31012 in position with 24" woodworker clamps.
Align the front holes and get the exact hole positions for the drilling.
The factory solution should be to tell CURT that making all 3 holes on both sides OVAL.
That provides a little margin for error.
Thanks
PS ......because I had the clamps, the install time was under 1 hour.
AND on my truck, NO cutting of bumper valance was needed
by: Jennifer 01/20/2021
Honda Ridgeline
I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.
by: Richard 12/22/2021
Another excellent product from etrailer! Works perfectly and was super easy to install. I recommend etrailer to all my friends and family
by: Gregg H.04/10/2012
2012 Chevrolet Avalanche
Here are a few pictures of the hitch on my 2012 Avalanche. The ones from underneath didn't come out as nice as I had wanted.
by: Kris W.10/29/2013
2010 Chevrolet Tahoe
e-trailer service and shipping were fantastic! As far as the Curt front receiver for 2007 Tahoe, the product is very well made and the install took about 1 hour. The ground clearance is not good. Ground clearance on my 2007 Tahoe is 7 inches and the angle of approach is half what it used to be. Angle of approach with my receiver winch is unacceptable. I also purchased the Roadmaster 10,000 pound 6 inch high/low hitch adapter and that helps to get the winch up, but the receiver is still plowing through mud. If you have a 2007+ Tahoe, get the Curt front mount skid shield to avoid catching the receiver hitch on rocks or driveways. I'd rather have a receiver through the license plate area or higher for better ground clearance and no loss on angle of approach - so I'm looking to custom build one since I can't find a manufacturer that makes one.
by: Timothy02/27/2020
etrailer has been a great!!! They have been updating me on all the shipments.
by: Randal Creel, Sr03/21/2011
Chevrolet Suburban
I ordered my Front Receiver for my Suburban back in January and received it about 3-4 days later. I was extremley pleased with the order process. I finally got around to puting it on in March????
Installation was a breeze, you do have to drill 4 holes but it was no big deal. Then I thought the hard part was going to be fishing the bolt/washers into the drilled holes but it was a piece of cake and actually was kinda fun. The "fishing" lines provided in the kit were great and they are now in my tool box in case I ever need to go "fishing" again. The Hitch works great and makes moving my trailers around a snap.
I chose not to trim the front spoiler because it looks fine to me.
I also now have a really neat step to get under the hood and I am going to add a winch stand and other toys to it.
Thanks the product is great!!!!!!!!!
I also now have a really neat step to get under the hood and I am going to add a winch stand and other toys to it.
Thanks the product is great!!!!!!!!!" />
by: Robert11/28/2016
Curt products are always good. Yet to install this hitch, but sure it will work fine as my previous Curt front mount hitch which unfortunately would not fit my new truck.
by: AO12/17/2010
Good Product/Install, Loss of Ground ClearanceInstall directions were detailed and straight foward. Having the right drills, bits, and sockets make the project easy. I spent 1.5 hours verse the recommended 45 minutes as a non-professional installer. Very pleased with the product, but instead of having to trim any fascia, the lowest part of the receiver sits below the fascia, making this the lowest point of the vehicle. I was hoping the receiver would maintain the vehicles stock ground clearance, but it is just too low. I installed this to carry a portable mounted winch and it may be too low to do this job effectively.
by: Thomas 06/21/2023
Always awesome!
by: Jack S.02/28/2014
Hitch was ordered, delivered in a timely manner. Suggest you offer 17/32 drill bits as I have visited Lowes, Home Depot, and 5 independent Hardware stores, no one has this size drill bit. I do not wish to use a readily available 9/16 drill bit, but may have too!!!
by: Tom 01/10/2014
2014 Chevrolet Silverado
Love it! It was very easy to install. 30 minutes max. The fish wire worked great. This will make it very easy to maneuver my boats into tight garage.
by: BobK02/26/2017
well buit hitch but mounted lower than the reviews had described.
by: G.Reed08/29/2017
2007 GMCYukon XL
The instructional video made installation easy. It arrived quickly with everything needed for installation.
by: Tom Chase11/07/2013
high quality product, mounted pretty easy. It was delivered quickly and in perfect shape. I would buy from etrailer again
25
41
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
- The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121.
You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
view full answer... - Snow Bear Plow Recommendation for 2008 Honda Ridgeline
- You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement.
You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
view full answer... - Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When Installed
- I was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500
- The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065.
If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup.
For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
view full answer... - Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
- Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
- Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - Snow Plow Recommendation for a 2002 Jeep Wrangler
- Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you.
I attached a review video for this plow for you to check out as well.
view full answer... - Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
- The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
view full answer... - How to Determine if the SnowBear Plow # SB324-080 Would Block Headlights
- The blade height of the SnowBear Plow # SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and whether or not the headlights would be blocked.
view full answer... - Recommended Front Mount Hitch for Attaching Snow Plow to 2004 Jeep Grand Cherokee
- We do indeed offer a front mounted hitch for your 2004 Jeep Grand Cherokee. You'll need the Curt # C31048. Once the front mount receiver is in place, you'll have the mounting point for a snow plow like the SnowBear # SB324-080. If you click the provided link, you can see the installation instructions for the hitch and the plow.
view full answer... - Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge Durango
- We have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models.
If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions
view full answer... - Recommended Snow Plow For A 1994 Jeep Wrangler
- I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow.
We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
view full answer... - Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
- The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
view full answer... - Recommended Snowplow for a 2020 Jeep Wrangler
- It sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle.
We do not carry ACI plows unfortunately.
view full answer... - What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
- I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is
view full answer... - Snowplow and Front Mount Trailer Hitch for a 2015 Ford F-150
- Yes, I recommend the SnowBear 82 inch snowplow # SB324-080 for your 2015 Ford F-150. You will also need to have a front mount hitch installed, # C31083, to mount and use the plow.
I also recommend the off-road lighting kit for this plow, # SB324-127, for better visibility when plowing at night since plows have the tendency to block vehicle lights.
view full answer... - Snow Plow for a 2005 Honda Pilot
- We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall.
view full answer... - Front Hitch and Snow Plow Recommendation for a 2003 GMC Envoy
- As long as you have a front hitch on your 2003 GMC Envoy like the # 31055 the snow plow part # SB324-080 will fit. It's a bit wider than most plows that would get used on a smaller SUV like the Envoy, but if you plan to upgrade to a full size truck eventually this would be a good plow to use.
You would be able to easily transfer it over to the Sierra when you needed too.
view full answer... - Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch Hitch
- For your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
view full answer... - Front Mount Hitch Receiver Location on a 2007 Chevrolet Tahoe LT3 Z71
- I spoke with my contact at Curt and he told me that there is only one mounting option for the Curt Front Hitch, # C31012. This hitch was designed to mount to the underside of the frame rails, hanging below the frame as it is pictured (see photo). He also told me that this hitch was not designed or tested to mount in any other orientation and doing so could not only cause damage to the hitch and your vehicle, but would void the warranty of the hitch.
If you would like to determine where
view full answer... - Is Trimming Required to Install Curt Front Mount Receiver on a 2015 Chevy Silverado 1500
- According to the installation instructions for Curt front mount receiver # C31012 which I have linked for you the only way to know if trimming will be required is to hold the hitch up into place and see if it interferes with anything. I can tell you that it is likely you will have to trim the lower air dam to install the hitch.
view full answer... - Does Curt Front Hitch for 2010 Chevy Avalanche Require Modifying Bumper
- The Curt hitch part # C31012 that you referenced does fit your 2010 Chevy Avalanche LTZ and does not require trimming the bumper. You do have to either remove the air dam or trim it but the bumper is not modified in any way.
view full answer... - Replacement Hardware for Curt Front Receiver # C31012
- Yes, you will need # RHK. On the RHK page you will enter the hitch number and Choose Curt as the manufacturer and we will assemble the correct hardware for that hitch. I have also linked a video showing an example installation for you.
view full answer... - Will Curt Front Hitch for 2013 GMC Yukon Work for Winching Out of Mud
- The Curt Front Mount Trailer Hitch Receiver part # C31012 which is a fit for a 2013 GMC Yukon has a max line pull rating of 9,000 lbs which is over 1.5x the vehicle's weight so it will work well for vehicle recovery when stuck whether that be snow or mud. In order to mount a winch you'll need a hitch mounted which tray for which I recommend the Superwinch Hitch Mounted Winch Mounting Plate with Handles part # SW2050. This will then pair well with a winch like the Superwinch Tiger Shark
view full answer... - Front Hitch Recommendation for a 2010 Chevy Silverado 2500
- The 1500 and 2500 series 2010 Chevy Silverados have different frame designs. Because of that the # C31012 that you referenced would only fit a 1500 model.
If you have a 2500 model you would instead want the # 65050 as I checked and it has been confirmed as a fit.
view full answer... - What Needs to Be Removed to Install a Curt Front Mount Trailer Hitch # C31012, 2009 Chevy Suburban
- To install the Curt Front Mount Trailer Hitch # C31012 that you referenced you will need to either remove the lower fascia or trim it.
Check out the picture I attached to see how it would need to be trimmed.
view full answer... - Installation Recommednations for SnowBear Snow Plow on 2014 GMC Sierra
- A trusted mechanic should be able to handle the installation for you. According to Curt, installation of their # C31012 front receiver should take around 45 minutes to an hour for an experienced installer. Once the receiver is installed, the plow will require assembly and electrical connections to the vehicle battery, and wiring the remote which should take a few hours. Any qualified mechanic should be able to complete the installation in around 3 or 4 hours.
I've linked you to the
view full answer... - Front Mount Hitch Receiver that Does Not Require Drilling for a 2015 Chevy Silverado 1500
- Draw-Tite front mount receiver # 65064 mounts to different locations on the 2015 Chevy Silverado 1500 than Curt hitch # C31012 or # C31069. I have included links to the installation instructions so you can see how each one installs.
I am of the opinion that no drilling is the much better option then one that requires drilling. Drilling into a vehicle frame isn't easy because the frame is so strong. So avoiding that is a good thing! That is why if it were my truck I would choose # 65064.
view full answer... - Hitch Bike Rack Options for 2015 Chevy Silverado with Truck Camper and Front-Mounted Hitch
- Your options for transporting bikes on your pickup that has a front-mounted hitch and an in-bed camper are either to use a hitch rack in the front hitch or to use a towing style rack like # Y36FR on the rear hitch extension. Since the rear-mounting location can interfere with your turning clearance I suggest you use a hanging style hitch rack in the front hitch.
TheCurt # C18085 2-bike rack is a cost-effective wheel-mount type rack that suspends your bikes from their wheels - great
view full answer... - Is There a Front Mount Trailer Hitch Receiver Available For a 2007 Chevy Suburban 2500?
- You will need to have a custom front hitch fabricated for your 2007 Chevrolet Suburban 2500. A Curt Weld-On 2" Receiver # E17 will allow you to have a custom receiver fabricated at a nearby fabrication shop. The Curt # C31012 receiver you found will only fit on the 1500 Suburban and there are currently no custom fit receivers for your 2500.
With a receiver positioned where your license plate currently sits you will need a License Plate Relocation Bracket # 5443 to use with your custom
view full answer... - Is There a Ground Clearance Difference Between Curt Front Hitches for 2018 Chevy Silverado 1500
- Both Curt front hitches that fit your 2018 Chevy Silverado 1500 from Curt part # C31012 and # C31069 install in the same area and require the same amount of the front fascia to be trimmed so the ground clearance would be the same.
view full answer... - Front Hitch Recommendation for 2010 Chevy Tahoe
- For your 2010 Chevy Tahoe the only front hitch we have available is the Curt # C31012 which is a confirmed fit.
To install the Curt Front Mount Trailer Hitch # C31012 that you referenced you will need to either remove the lower fascia or trim it.
Check out the picture I attached to see how it would need to be trimmed.
view full answer... - What Size Holes Need to be Drilled to Install Curt Front Mount Hitch on a 2014 Chevy Silverado
- I am not sure why the instructions are not opening for you so I can email them to you in a separate email. But in the instructions step 4 says to drill four 17/32 inch holes.
There is some fascia trimming required to install the hitch also shown in the instructions so you will need to compare them to your truck to see if the crash avoidance system or parking assist system will get in the way. Based on pictures I have seen of the hitch installed on customers trucks I do not believe it
view full answer... - Availability of Front Mounted Trailer Hitch for Carrying Bikes on Front of 2011 GMC Yukon XL
- We do indeed have a front hitch that's compatible with your 2011 GMC Yukon XL, the Curt # C31012. The hitch would work fine for carrying a bike rack, but my fear is that having bikes at the front of the vehicle will obstruct the driver's view, possibly to the point of being unsafe. The bikes could also possibly block the headlights, further leading to visibility problems.
The Stromberg Carlson Bike Bunk, part # CC-275 would be a infinitely safer alternative in my opinion. The bike bunk
view full answer... - Recommended Front-Mounted Hitch for 2015 Chevrolet Silverado 1500 High Country
- We offer three front-mount 2-inch trailer hitches for your 2015 Chevrolet Silverado 1500 High Country that can be seen on the linked page. I recommend the Draw-Tite # 65064 for its no-drilling installation. Do note all front hitches for your truck will likely require some fascia trimming. The written instructions from Draw-Tite are linked for your reference. All required hardware is included.
If you're installing the hitch to enable use of a snowplow like # K2AVAL8422 you might want
view full answer... - Front-Mount Receiver Hitch Option For 2012 Chevrolet Suburban
- The Curt Front-Mount Receiver, part # C31012 is the only front hitch we offer for your 2012 Suburban.
This hitch is designed as a custom fit and comes with all the hardware needed for installation.
view full answer... - Replacement Install Hardware for Curt Hitch C31012
- We sell replacement hitch hardware kits for the Curt hitch you have # C31012 with the part # RHK.
view full answer... - Front Hitch Recommendation for 2013 Chevy Avalanche Non-ZL1
- The best solution we have would be the Curt Front hitch part # C31012 as we've installed it on a 2008 GMC Yukon which has the similar style of front bumper to your Avalanche and we didn't have to cut into the front bumper like what you see in the install video I attached below. Also check out the install pictures too.
This hangs a couple inches lower than the Draw Tite too so it's the better choice.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Kathleen M
Test Fit:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.