Camping Kitchen Specs:
Features:
Prepare meals on the trail with this slide-out camp kitchen for your Jeep Wrangler. Modular system holds a portable fridge and includes countertop with a storage compartment. Trays are easy to open and lock in place while stored to prevent movement.
More Information >Features:
Hardware kit includes everything you need to install a soft top on your vehicle. Bows, bars, and rails are black powder coated for durability and corrosion resistance. Adjustable spreader bar makes it easy to tighten and loosen top.
More Information >Camping Kitchen Specs:
Features:
Cook meals on the trail with this slide-out camp kitchen for your Jeep Wrangler. Modular system supports a portable fridge and a 2-burner propane stove. Nesting trays are easy to open and lock in place while stored to prevent movement during travel.
More Information >Jeep Storage Specs:
Features:
This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Sturdy ratchet strap holds jerry can in place. Installs behind either fender.
More Information >Features:
Bring the convenience of your kitchen sink to the trail with this camping sink. Easily fits into cutout on countertop and collapses for storage. Easily folds into the storage compartment on your MORryde camp kitchen (MR83MR - sold separately).
More Information >Features:
This compact countertop adds more space to prepare meals on the trail. Clip-on design makes it easy to set up. HDPE material resists moisture and odors. Works with both styles of MORryde camping kitchens (MR83MR and MR73QR - sold separately).
More Information >Features:
This fold-out countertop adds more space to prepare meals on the trail. Hinged design makes it easy to set up and store. HDPE material resists moisture and odors. Works with MORryde camp kitchen with storage compartment (MR83MR - sold separately).
More Information >Features:
This MOLLE panel lets you attach extra gear, RotopaX water containers, or kitchen utensils to your MORryde camping kitchen. Doubles as a side wall to help keep your portable fridge from tipping over when you are off-road. Rugged steel construction.
More Information >Jeep Storage Specs:
Features:
This jerry can mount lets you carry fuel so you can fill up when you're off the beaten path. Works with 5 gallon NATO-style or Scepter fuel cans. Installs on your factory or MORryde spare tire carrier.
More Information >Features:
Change the look of your vehicle by upgrading some of its hardware. These replacement door hinge brackets are made of durable, corrosion-resistant powder coated steel with a black finish for rugged style.
More Information >Features:
Change the look of your vehicle by upgrading some of its hardware. These replacement door hinges are made of durable, rustproof stainless steel with a polished finish for sleek style. Hinges have integrated holes for mounting side mirrors.
Tech Tip:
Product intended for vehicles with half steel doors
More Information >Features:
Relocate your factory side-view mirrors to your vehicle's windshield frame so that you can remove your doors without having to sacrifice your field of vision. Brackets attach to existing holes - no drilling required.
More Information >Features:
Bring the convenience of your kitchen sink to the trail with this camping sink and faucet. Included pump provides water from an on-board source. Easily folds into the storage compartment on your MORryde camp kitchen (MR83MR - sold separately).
More Information >Vehicle Trim Specs:
Features:
Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with rugged new ones. Black powder coated steel is stylish, durable, and corrosion resistant.
More Information >Features:
Make sure your Jeep's tailgate stays open while you load or unload items. This handy device mounts to your tailgate and has a slide bar that props the door open for as long as you need it to. Easy-to-use knob secures slide bar in place.
More Information >Features:
Kit replaces a damaged Jeep Wrangler soft door rotary paddle handle. The handles are sold in pairs and designed to fit the vehicle's factory-original door striker pin.
More Information >Vehicle Trim Specs:
Features:
Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with shiny new ones. Polished stainless steel is stylish, durable, and rustproof.
More Information >Features:
This kit lets you replace your vehicle's factory soft top hardware. It includes the BeltRail attachment system, header, quick-release bow knuckles, bow-mount adjustment plates, top arch bar, door surrounds and a tailgate bar.
More Information >Features:
Replace your old or damaged factory windshield upright inserts with this new pair. These inserts attach to Rampage door surrounds (not included) so that you can attach a Rampage soft top to your Jeep Wrangler.
More Information >Features:
Replace the old or broken tailgate bar on your vehicle with this sturdy powder coated steel bar. Behind-the-seat tonneau cover is made of durable fabric and attaches to the bar and to your rear wheel wells, allowing you to conceal and protect cargo.
More Information >Features:
Replace your old or damaged factory windshield channel with this new one so that you can attach a factory or Rampage soft top to your Jeep. Hardware included.
More Information >Features:
Change the look of your vehicle by upgrading some of its hardware. These oversize windshield hinges are made of durable, powder coated steel with a black finish for rugged style.
More Information >Vehicle Trim Specs:
Features:
Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with shiny new ones. Polished stainless steel is stylish, durable, and rustproof.
Tech Tip:
Product intended for vehicles with full factory steel doors
More Information >Features:
Change the look of your vehicle by upgrading some of its hardware. These oversize windshield hinges are made of rustproof stainless steel with a polished finish for sleek style.
More Information >Features:
Replacement Door Pin Inserts fit Jeep lower steel half doors, replacing lost or cracked factory door pin inserts. Door pins come in set of three.
More Information >Features:
Replacement Door Pin Inserts fit Jeep lower steel half doors, replacing lost or cracked factory door pin inserts. Door pins come in set of three.
More Information >Features:
Replace an old or broken spreader bar on your Jeep's soft top with this factory-grade bar. Fits 1987-1995 Jeep Wranglers.
More Information >Features:
Replace your old or damaged tub rails with these new ones. The steel rails let you secure the plastic edge on your factory or Rampage Jeep soft top. Hardware included.
More Information >Features:
Change the look of your vehicle by upgrading some of its hardware. These replacement door hinge brackets are made of durable, rustproof stainless steel with a polished finish for sleek style.
More Information >Videos
for Jeep Storage
Help Articles
for Jeep Storage
Expert Answers
for Jeep Storage
Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…
view full answer...Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…
view full answer...The drawer dimensions of the MORryde Trail Kitchen for Jeep Wrangler Or Wrangler Unlimited #MR83MR are 15-3//4 inch wide by 25-1/2 inch long by 6.6 inches tall.
view full answer...Hey Brandy, yes you would be able to open the rear door of your 2020 Chevy Equinox with the Curt hitch cargo carrier part #C18152 installed and it would have clearance.
view full answer...The top tray on the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler #MR83MR measures 0.947" so you're looking at just under an inch tall, which I confirmed with my contact at MORryde. Hope this helps you out!
view full answer...The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.
view full answer...Hey Emilie, We can get your 2024 GMC Sierra 3500 set up with an extension, but to do so what you'll have to do is remove the factory hitch and install the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR. Reason for that is there…
view full answer...The first step would be to determine the exact bolt pattern of the wheel. If you click the provided link, you'll be taken to an FAQ article that shows exactly how to do this. Once you determine the bolt pattern, you can compare that information…
view full answer...The CE Smith #CE27310G spare tire carrier you'd mentioned would work well for your trailer frame. The carrier is compatible with trailer frames up to 4 inches tall and from 1 to 3-1/2 inches wide. The carrier is compatible with wheels with 4 on…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I checked with Progressive Dynamics and the approved breakers for use with the Progressive Dynamics 4000 Series #PD4045KA are: Thomas & Betts – TB & TBBD series Square D – HOM & HOMT series Cutler Hammer/Bryant – BR & BRD series GE –…
view full answer...You are correct that you'll need to attach the AC Converter Hot (Black Wire) to a 15 amp breaker when installing the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA. You will not be limited to 15 amps on the DC…
view full answer...Filter Products (29)
Contact and Help
What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN