Bumper Specs:
Features:
...to mount 2 driving lights (sold separately) up to 6" in diameter Built-in tabs let you easily attach D-rings (sold separately) or other accessories Black powder coated steel is durable and ...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
...lighting allows for maximum light distribution Recessed design keeps lights protected 3/16" Thick steel plate construction is sturdy and built for off-road abuse Semigloss black, dual-stage powder ...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
...for off-road use Semigloss black, dual-stage powder coat finish is durable and corrosion resistant Specs: Maximum spare tire diameter: 35" Hitch receiver size: 2" x 2" Light recep...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...Dual-stage black powder coat sits on top of zinc undercoat for maximum corrosion protection Simple, bolt-on installation 1-Year limited warranty 97801 Rampage Front Rock Rage Bumper - Black Steel...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
Replace your factory front or rear bumper with this stylish, tubular bumper. Double-tube design provides protection for your vehicle. Dual powder coat finish over zinc coating offers maximum corrosion resistance.
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...lighting allows for maximum light distribution Recessed design keeps lights protected 3/16" Thick steel plate construction is sturdy and built for off-road abuse Textured, matte black, dual-stage po...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
...carrier with your Jeep Black powder coated steel is durable and rust resistant Dual powder coat sits on top of dense zinc undercoat for maximum corrosion protection Welded, 1-piece construction for added...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...to 6" in diameter Built-in tabs let you easily attach D-rings (sold separately) or other accessories Black powder coated steel is durable and rust resistant Quick, easy installation with included hard...
Installation Notes:
No drilling required for installation
More Information >Bumper Specs:
Features:
...Tubular front bumper replaces your factory bumper to add style and protection for your vehicle Raised center bar guards your grille from impacts Black powder coated steel is durable...
Installation Notes:
Drilling may be required for installation
More Information >Bumper Specs:
Features:
...for off-road use Textured black, dual-stage powder coat finish is durable and corrosion resistant Specs: Maximum spare tire diameter: 35" Hitch receiver size: 2" x 2" Light recep...
Installation Notes:
Drilling may be required for installation
More Information >Videos
for Bumper
Help Articles
for Bumper
Expert Answers
for Bumper
Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…
view full answer...You do not want to use a holding tank heater like ThermaHeat #277-000164 on a battery but we do offer battery heaters specifically intended to protect one from extreme cold. You can see all such items on the page I linked for you.…
view full answer...We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
view full answer...From the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does…
view full answer...The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing #L68149 and an outer bearing #L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com…
view full answer...A #93 incandescent bulb has a single contact bayonet base, and there are a couple of options for LED bulbs that will replace these. You can choose a bulb that gives off either a warm or cool light; I have added a photo showing the difference…
view full answer...Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side.…
view full answer...You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most…
view full answer...Filter Products (20)
Contact and Help
What our customers are saying:
Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly.
Rich
Arlington, TX