# 1
Tekonsha Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
The wiring harness and trailer hitch from ETrailer work great. No issues whatsoever. It works as it should. FTIW, I have self-installed hitches in the past on other cars and consider myself a savvy shade-tree mechanic. Although the installation of both products didn't look that difficult, and there are a wealth of vids by etrailer, my problem was the jacking and safe under-body access on the Tesla. I just don't have the facilities, and was wary by the weight of the car plus warranty issues. So I opted for a pro intsall job. Given the nature of the beast, and this is no reflection on etrailer, if I were doing it again I'd prob just spring for the pricey Tesla install. Since I live in the sticks, I had to drive pretty far anyhow to find an installer, let alone a good one. The bumper removal etc. for the hitch install isn't difficult, just that pesky wiring and a safe work condition.
Install on 2018 Mercedes Benz CLA250 w/LED tail lights: There were no guides I could find so I'm posting this for other etrailer customers. These are my installation notes and the kit operates correctly. There are other ways to do this, I'm sure. It isn't necessary to remove the tail lights, there is a removable piece in the trunk carpet. I removed that and the plastic trim panel in the middle. The tail lights have 10-pin connectors. On the left there are 8 wires on the right there are 7. My thought is maybe this has something to do with the european style parking lights. After probing I found this: Left Side: Turn/Brake - Yellow with White stripe Running/headlights - Black with Orange stripe There is constant power to the Green with White stripe Right Side: Turn/Brake - Light Blue with Red There is constant power to the Green with White stripe I had to splice additional wire to mount the module where I wanted it. The final connections were: Module Brown to Left Black/Orange Module Yellow to Left Yellow/White Module Green to Right Light Blue/Red Module White to Ground Module Black to Battery Module Red Terminated (unused) The positive electrical connection I made was under the hood, off the fuse box. Terminated to one of the lugs, covered with wire loom, and run into one of the cars wire bunches. The 4-wire hitch output is terminated with a CURT tester (If you put one there, you'll always know where it is when you need to troubleshoot something) This vehicle is completely covered on the bottom and running the wire can be very time consuming if you want it to look tidy.
# 2
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
# 3
Hopkins Endurance 6-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
The stuff not here
Very difficult to make the wiring connections, I was afraid I’d have problems on down the road so, I took it out of circuit and threw it away
# 4
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.
Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.
# 5
Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
Worked out awesome. I bought this for a buddy for his used truck. The previous owners for what ever reason took it. Plugged it in and worked flawlessly.
It is a direct OEM replacement, easy installation. What I liked most was a real person answered my call and took my order, Katherine was very polite and knowledgeable. Thanks again. CJ
# 6
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.
The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.
# 7
Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.
I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.
# 8
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End
I recently had a need for the Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End - HM48190 to replace the faulty one on my van. It was easy to find what I needed on the site and the price was comparable to other sites I had visited. I decided to go with etrailer because I had previously ordered the hitch through them. I appreciated the fact that an email was sent out confirming that they received the order as well as a follow-up email telling me that the part was shipped along with providing the tracking number. The installation of the part was easy and took no time to complete. Overall it was a fine experience and if I need to order anything in the future, I will be sure to come back and order from etrailer.
Great product. Easy to install
# 9
RoadMaster 4-Wire Connector - Vehicle End
We just finished a makeover of our 1995 boat trailer. New bunks, sanded and painted but the best part of the project was the new LED lights from your company. They are so much brighter than the old incandescent bulbs that you really do feel safer driving down the road. We pulled the 20 year old wire out and replaced with new and used the 3M scotch loks to tie in. We were not sure the new style grommets would fit the old holes in the frame but they fit great. Your customer service was great, alerting me to a backordered reflector but recommended a replacement that worked fine. Patrick set up a Q&A page for me since I had questions about the best way to protect connections with dielectric grease, heat shrink and tape. Your website is one of the best with ease of navigation, complete pictures, great selection and thorough info, dimensions, etc. You guys really have your act together and also offer great value. I would not hesitate to purchase again and will recommend you when I can. I have attached a couple of pictures. Thanks for all your help. Wayne N.
Easy to install and works great.
# 10
Hopkins Tail Light Converter with 4-Way Flat Trailer Connector
I used the Hopkins 3 to 2 converter to make a 6-pin round to 4-flat connector for my Winnebago View motorhome. While there are 6-4 plugs available to do this, they do not work on the Winnebago View (no brake lights). This adaptor works great.
This device was no help in connecting my five wire trailer to my four wire goldwing. I ended up having to use a number of diodes in the trailer wiring to make everything work properly. My trailer had red LEDs that were used for Brake, Turn & stop and I had to get the brake and turn function to share the same lead on the light fixture.
What our customers are saying:
"very easy to shop"