# 1
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
Great fit and finish on this kit. So nice to be able to tow things with my Forester now. I thought I had an issue but figured out it was user error pretty quick, but only after I contacted etrailer for help. I heard back within 30 minutes of emailing and by that time I figured out my blunder. They were extremely helpful and responsive and were set on fixing the problem I thought I had. I have used etrailer for several different purchases over the past couple years and every time I have been thrilled with the service and the quality of product.
# 2
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 3
Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K
Excellent hitch for my sled trailer! When bringing our 5 snowmobiles up north with the open deck trailer, tongue bounce felt like you were riding a bucking bronco the journey. This trailer hitch took 95% of the tongue bounce OUT! The trailer smoothly rides down the road with little to no jerkiness in the cab of the F150. I will definitely recommend this hitch to others!
# 4
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Delivered on time. Great curt products overall
# 6
Buyers Products Ball Mount w/ 2" Ball - 3/4" Rise, 2" Drop - 8-1/2" Long - 5K
The hitch was delivered as ordered. The 2" ball was torqued on and it is a perfect fit to the receiver. Solid and high quality. etrailer.com has continued to be a great online retailer for me.
Paul/ you were a great help. Told me everything I needed to know. It works fine each time I use it. Thank you, Scott
# 7
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 8
Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
I had previously purchased the etrailer hitch for my 2021 Ford Transit 150. It was a little short in length and the bumper prevented my current ball mount from working. As always, etrailer had the perfect solution. The Draw-Tite is well made and will now remain permanently with the van to be handy whenever the need arises.
It works fine, it's a drawbar. Etrailer is always easy to deal with and decent pricing.
# 9
Curt Shock Absorbing Towing Kit w Sway Control, Wireless Brake Controller - 2-5/16" Ball - 7.5K
# 10
Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab - 7.5K
The RockerBall is great. Only issue is that it won't work with the Ball Mount w/Sway control that was shipped with it. May have to return both items if a fix isn't available.
Everything I buy from Etrailer is always what I expected to receive. Haven’t tried hitch yet but I know it Will accomplish what I need it to. Just surprised I received all in one piece sent it was shipped USPS. Came to Alabama, sent up to Pa. Then back to Me in Alabama. Box was shedded but everything was still in it. This has happen several other times as well! Lol
# 11
Curt RockerBall Anti-Rattle Towing Kit - 2" Ball - 8-1/4" Long Mount - 7,500 lbs
This all-in-one kit does everything it promises to do. I wish I'd learned about it sooner.
So I’ve been wanting the rocker ball for a while now and I’ve finally bought it. I bought the kit and it comes with a regular curt hitch, anti rattle kit, and the Rocker Ball. Construction seems solid on all Items. The hitch did arrived with a small area the size of half a penny of the powder coating chipped. I think it might’ve occurred during transit. Installation is fast BUT and a big BUT is very difficult to keep the rocker ball aligned to the hitch while you are torquing the nut. Mine ended up being noticeable sideways when I finished torquing it. I had to try it a couple of times and even then I couldn’t torque it all the way without 1. The rockerball assembly going sideways and 2. Without the tabs on the metal bracket bending.( one corner did bend. Anyways seems like a good product and if you don’t care of the Rockerball not being sorta aligned ( I honestly think that it shouldn’t be of fwhen fully tightened because then the rocker ball is not going to move straight back and straight forward) then I supposed it’s ok... If you are like me that gets bothered by details like this then find something else. I would’ve returned it but I scratched the hitch trying to get the Rockerball sorta aligned. Anyways take my experience with a grain of salt and good luck.
What our customers are saying:
"You are very good at what you do. Have a nice day. Bill"