Most Popular Cushioned Double Pivot for 2019 GMC Sierra 1500

So far it works great. Only pulled in a short distance and backed it up into my driveway. Make sure you have help lifting this. Very Very heavy. Directions were average but got the job done. Love the extra turning radius on my short bed F250. Make sure all the parts are there. The handle to release the king pin off the hitch was not in the packaging. The box that the hitch and slide came in were all in tacked and looked good. Emailed etrailer and within a few hours they sent were processing the order for the handle. Arrived in 2 days. That's great customer service.

Click to Enlarge

Looks like a received a returned hitch. All my hardware is missing. And still waiting on one box. The sliding rails. Starting off to a bad start.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Love it. Easy to take apart and move! The instructions were very clear on how to assemble. I pull a 43ft camper and have yet to have any problems! Well worth the $$

Click to Enlarge

I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.

Click to Enlarge

I purchased both the Curt A16 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs - C16120, and Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4 - RP58093 for my F350 SD 4X4 Crew Cab Long Bed. I'm pulling a 30' Retro 5th. Wheel and at times I pull my tandem axle UTV Trailer (Double Trailers) . I already had the rails installed in my truck, this fit right in and I used the new Pins and Lock Plates for securing to truck. I have pulled all over from South Dakota and the Northwest. The Hitch has performed Flawlessly. No bucking, nor clunking. Very quiet and smooth ride. I would recommend this set up to anyone for convenience of Hook up and Disconnect, Excellent towing, quiet, and the security of the lock pins. I use Disc locks to prevent access for bolt cutters.

Click to Enlarge

I was fully expecting a hitch in excess of 100 pounds to show up in a destroyed box. This did not. They had taken the Time and effort to cover the box with an additional layer of cardboard and it must have had a million staples in it. It was almost comical, you will need a crowbar or large screwdriver to get it open. However, when I did finally get the package open I found a perfectly un scratched hitch with no missing parts. I have not pulled with the hitch yet but , it does look like it is going to perform great. I'm using this in a 2006 ram 2500 4x4 short bed pulling a 2015 forest river Salem and it allows 91 degrees of turning due to the clipped corners on the front cap of the trailer. I will be curious to see how long the rubber isolators last before needing replaced and if they are readily available. Also the curt sticker on the hitch was peeling off when I took it out of the box, would be nice to get that replaced.

Click to Enlarge

Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.

Click to Enlarge

This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

Installed in a 2018 GMC 3500 LB SRW Overall it was really easy to put together. Its light enough move in and out and very sturdy. I did not have a clearance issue with the Backflip cover regarding the stock handle. See pics. Just a heads up, I had an issue with the threading in the legs, etrailer was very understanding and sent me out replacements supper fast. I contacted Reese regarding paint guncked up in the threading and they were aware of the issue, they recommended running a wire brush or a tap to clean it out.

Click to Enlarge

Click to Enlarge

Click to Enlarge